PartsTable
Technical Data Sheet
Download PDF

7371050 — CLAMP,LOOP

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

7371050: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include material: STEEL BAND, slot_width: 0.340 INCHES NOMINAL IN, slot_length: 0.460 INCHES NOMINAL IN, overall_width: 1.000 INCHES NOMINAL IN, style_designator: SINGLE LOOP, material_thickness: 0.11961 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-737-1050, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7371050
NSN: 5340-00-737-1050
FSC: 5340 — Hardware, Commercial
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
materialSTEEL BAND
slot_width0.340 INCHES NOMINAL IN
slot_length0.460 INCHES NOMINAL IN
overall_width1.000 INCHES NOMINAL IN
style_designatorSINGLE LOOP
material_thickness0.11961 INCHES NOMINAL IN
loop_inside_diameter1.680 INCHES NOMINAL IN
distance_from_loop_center_to_tongue_end2.110 INCHES NOMINAL IN
distance_from_loop_center_to_short_tongue_end2.050 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole1.430 INCHES NOMINAL IN
NSN5340-00-737-1050
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 7371050 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: SINGLE LOOP
•
MATERIAL THICKNESS: 0.11961 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 2.110 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 1.430 INCHES NOMINAL IN
•
MATERIAL: STEEL BAND
•
DISTANCE FROM LOOP CENTER TO SHORT TONGUE END: 2.050 INCHES NOMINAL IN
•
SLOT WIDTH: 0.340 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORSINGLE LOOP
OVERALL WIDTH1.000 INCHES NOMINAL IN
MATERIAL THICKNESS0.11961 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END2.110 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE1.430 INCHES NOMINAL IN
MATERIALSTEEL BAND
DISTANCE FROM LOOP CENTER TO SHORT TONGUE END2.050 INCHES NOMINAL IN
SLOT WIDTH0.340 INCHES NOMINAL IN
SLOT LENGTH0.460 INCHES NOMINAL IN
LOOP INSIDE DIAMETER1.680 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
GPW5270Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 7371050?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7371050?
7371050 is a CLAMP,LOOP.
What parts can replace 7371050?
There is 1 known substitute for 7371050: GPW5270. Substitute compatibility should be verified for your specific system.
What is the NSN for 7371050?
7371050 is cataloged in the U.S. Government catalog under NSN 5340-00-737-1050. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7371050