The ARM,STEERING GEAR is a the manufacturer industrial component. Key specifications include taper: 0.750 PER FOOT IN INCHES NOMINAL, diameter: 0.859 INCHES MINIMUM AND 0.864 INCHES MAXIMUM IN, design_type: OFFSET, taper_length: 0.570 INCHES MINIMUM AND 0.600 INCHES MAXIMUM IN, teeth_quantity: 36, counterbore_feature: NOT INCLUDED. This product is currently in active production with full OEM support.
This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-421-2432, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
| taper | 0.750 PER FOOT IN INCHES NOMINAL |
| diameter | 0.859 INCHES MINIMUM AND 0.864 INCHES MAXIMUM IN |
| design_type | OFFSET |
| taper_length | 0.570 INCHES MINIMUM AND 0.600 INCHES MAXIMUM IN |
| teeth_quantity | 36 |
| counterbore_feature | NOT INCLUDED |
| small_end_teeth_depth | 0.0348 INCHES NOMINAL IN |
| teeth_cut_angle_in_deg | 1 DEG 37 MIN |
| small_end_major_diameter | 0.837 INCHES MINIMUM AND 0.839 INCHES MAXIMUM IN |
| drag_link_end_characteristic | W/INTEGRAL BALL |
| serration_included_angle_in_deg | 90.0 |
| sector_shaft_mounting_end_overall_width | 1.620 INCHES NOMINAL IN |
| NSN | 3110-00-421-2432 |
| RETAINER FABRICATION METHOD | PRESSED |
| INTERNAL CLEARANCE | 0.0011 INCHES MINIMUM RADIAL AND 0.0014 INCHES MAXIMUM RADIAL IN |
| OVERALL OUTSIDE DIAMETER | 0.7500 INCHES NOMINAL IN |
| SURFACE FINISH | GROUND |
| OVERALL WIDTH | 0.4376 INCHES NOMINAL IN |
| MATERIAL | STEEL COMP M50 INNER RING |
| STANDARD TOLERANCE DESIGNATION | ABEC NO.5 |
| STYLE DESIGNATOR | NON-LOADING GROOVE, NON-SEPARABLE, TANDEM MOUNTING |
| BORE DIAMETER | 0.2500 INCHES NOMINAL IN |
| LOAD DIRECTION | RADIAL |