PartsTable
Technical Data Sheet
PartsTable / O-RING / 737-16
737-16 ✓ Verified by PartsTable
Mobiparts · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

Essential TPU Case for Sony Xperia L2 Features: Essential TPU Case Soft, flexible and strong TPU material Perfect fit Full access to all buttons and connectors Anti-slip material Compatible with Sony Xperia L2 This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-01-014-8959, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
737-16
NSN: 5331-01-014-8959
FSC: 5331 — O-RING
CAGE: 25184 — PARKER HANNIFIN CORPORATION DIV O-RING DIVISION (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING OVERALL
head_styleBUTTON
thread_class3A A
fastener_length0.500 INCHES NOMINAL IN
thread_directionRIGHT-HAND
nominal_thread_diameter0.138 INCHES IN
thread_quantity_per_inch32
thread_series_designatorUNIFIED NATIONAL COARSE (UNC)
NSN5331-01-014-8959
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 737-16 MFR: Mobiparts ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HARDNESS RATING: 75.0 SHORE DUROMETER A NOMINAL
•
CROSS-SECTIONAL HEIGHT: 0.116 INCHES NOMINAL IN
•
MATERIAL: RUBBER
•
TEMP RATING: -65.0 FAHRENHEIT AND 225.0 FAHRENHEIT DEGF
TECHNICAL CHARACTERISTICS (FLIS)
HARDNESS RATING75.0 SHORE DUROMETER A NOMINAL
CROSS-SECTIONAL HEIGHT0.116 INCHES NOMINAL IN
MATERIALRUBBER
TEMP RATING-65.0 FAHRENHEIT AND 225.0 FAHRENHEIT DEGF
VERIFIED SUBSTITUTES & CROSS-REFERENCES 19
329717Interchangeable
interchangeable cross-reference
interchangeable
329716AND329717Interchangeable
interchangeable cross-reference
interchangeable
S2605-852062ANDS2605-852063Interchangeable
interchangeable cross-reference
interchangeable
10172786Interchangeable
interchangeable cross-reference
interchangeable
3-16Interchangeable
interchangeable cross-reference
interchangeable
17343FXInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 737-16?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 737-16?
737-16 is a SCREW,CAP,SOCKET HEAD manufactured by Mobiparts.
What parts can replace 737-16?
There are 19 known substitutes for 737-16: 329717, 329716AND329717, S2605-852062ANDS2605-852063 and 16 more. Substitute compatibility should be verified for your specific system.
Is 737-16 still available?
737-16 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 737-16

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026