PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 7368084
7368084 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include outside_diameter: 10.875 INCHES NOMINAL IN, aperture_diameter: 9.750 INCHES NOMINAL IN, cross-sectional_thickness: 0.125 INCHES NOMINAL IN, cross-sectional_shape_style: SOLID SINGLE OR COMPOSITION. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-736-8084, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7368084
NSN: 5330-00-736-8084
FSC: 5330
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
outside_diameter10.875 INCHES NOMINAL IN
aperture_diameter9.750 INCHES NOMINAL IN
cross-sectional_thickness0.125 INCHES NOMINAL IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
NSN5330-00-736-8084
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 7368084 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
CROSS-SECTIONAL THICKNESS: 0.125 INCHES NOMINAL IN
•
APERTURE DIAMETER: 9.750 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 10.875 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
CROSS-SECTIONAL THICKNESS0.125 INCHES NOMINAL IN
APERTURE DIAMETER9.750 INCHES NOMINAL IN
OUTSIDE DIAMETER10.875 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
88712Interchangeable
interchangeable cross-reference
interchangeable
133308Interchangeable
interchangeable cross-reference
interchangeable
133308-00Interchangeable
interchangeable cross-reference
interchangeable
7329617Interchangeable
interchangeable cross-reference
interchangeable
2165995Interchangeable
interchangeable cross-reference
interchangeable
9-56424-2Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 7368084?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7368084?
7368084 is a GASKET.
What parts can replace 7368084?
There are 10 known substitutes for 7368084: 88712, 133308, 133308-00 and 7 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 7368084?
7368084 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-736-8084. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7368084

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026