PartsTable
Technical Data Sheet
Download PDF

736720 — CLEVIS,ROD END

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

736720: CLEVIS,ROD END.

The CLEVIS,ROD END is a the manufacturer industrial component. Key specifications include material: STEEL COMP 630 OVERALL, hole_diameter: 0.188 INCHES NOMINAL IN, overall_height: 0.365 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN, fork_span_width: 0.255 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN, fork_arm_thickness: 0.068 INCHES MINIMUM AND 0.088 INCHES MAXIMUM IN, material_document_and_classification: AMS 5643 ASSN STD SINGLE MATERIAL RESPONSE OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-224-0551, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
736720
NSN: 5340-01-224-0551
FSC: 5340 — Hardware, Commercial
CAGE: 55820 — RTX CORPORATION DIV PRATT & WHITNEY (USA)
SPECIFICATIONS
materialSTEEL COMP 630 OVERALL
hole_diameter0.188 INCHES NOMINAL IN
overall_height0.365 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN
fork_span_width0.255 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN
fork_arm_thickness0.068 INCHES MINIMUM AND 0.088 INCHES MAXIMUM IN
material_document_and_classificationAMS 5643 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
distance_from_pivot_pinhole_center_to_rod_connection_end1.736 INCHES MINIMUM AND 1.755 INCHES MAXIMUM IN
NSN5340-01-224-0551
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 736720 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FORK SPAN WIDTH: 0.255 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN
•
FORK ARM THICKNESS: 0.068 INCHES MINIMUM AND 0.088 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5643 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
MATERIAL: STEEL COMP 630 OVERALL
•
HOLE DIAMETER: 0.188 INCHES NOMINAL IN
•
DISTANCE FROM PIVOT PINHOLE CENTER TO ROD CONNECTION END: 1.736 INCHES MINIMUM AND 1.755 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.365 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN
FORK SPAN WIDTH0.255 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN
FORK ARM THICKNESS0.068 INCHES MINIMUM AND 0.088 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 5643 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIALSTEEL COMP 630 OVERALL
HOLE DIAMETER0.188 INCHES NOMINAL IN
DISTANCE FROM PIVOT PINHOLE CENTER TO ROD CONNECTION END1.736 INCHES MINIMUM AND 1.755 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 736720?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 736720?
736720 is a CLEVIS,ROD END.
What is the NSN for 736720?
736720 is cataloged in the U.S. Government catalog under NSN 5340-01-224-0551. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 736720

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.