PartsTable
Technical Data Sheet
Download PDF

736695 — CLAMP,LOOP

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

736695: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING OVERALL, tongue_hole_type: ROUND, THREADED, nominal_thread_size: 0.164 INCHES AND 0.194 INCHES IN, loop_inside_diameter: 0.745 INCHES MINIMUM AND 0.755 INCHES MAXIMUM IN, material_document_and_classification: AMS 5646 ASSN STD SINGLE MATERIAL RESPONSE OVERALL, distance_from_loop_center_to_tongue_end: 0.735 INCHES MINIMUM AND 0.765 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-223-3249, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
736695
NSN: 5340-01-223-3249
FSC: 5340 — Hardware, Commercial
CAGE: 55820 — RTX CORPORATION DIV PRATT & WHITNEY (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING OVERALL
tongue_hole_typeROUND, THREADED
nominal_thread_size0.164 INCHES AND 0.194 INCHES IN
loop_inside_diameter0.745 INCHES MINIMUM AND 0.755 INCHES MAXIMUM IN
material_document_and_classificationAMS 5646 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
distance_from_loop_center_to_tongue_end0.735 INCHES MINIMUM AND 0.765 INCHES MAXIMUM IN
center_to_center_distance_between_loop_and_mounting_hole0.594 INCHES NOMINAL IN
NSN5340-01-223-3249
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 736695 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5646 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 0.735 INCHES MINIMUM AND 0.765 INCHES MAXIMUM IN
•
NOMINAL THREAD SIZE: 0.164 INCHES AND 0.194 INCHES IN
•
TONGUE HOLE TYPE: ROUND, THREADED
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.594 INCHES NOMINAL IN
•
MATERIAL: STEEL CORROSION RESISTING OVERALL
•
LOOP INSIDE DIAMETER: 0.745 INCHES MINIMUM AND 0.755 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 5646 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
DISTANCE FROM LOOP CENTER TO TONGUE END0.735 INCHES MINIMUM AND 0.765 INCHES MAXIMUM IN
NOMINAL THREAD SIZE0.164 INCHES AND 0.194 INCHES IN
TONGUE HOLE TYPEROUND, THREADED
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.594 INCHES NOMINAL IN
MATERIALSTEEL CORROSION RESISTING OVERALL
LOOP INSIDE DIAMETER0.745 INCHES MINIMUM AND 0.755 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 736695?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 736695?
736695 is a CLAMP,LOOP.
What is the NSN for 736695?
736695 is cataloged in the U.S. Government catalog under NSN 5340-01-223-3249. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 736695

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.