7365815 — Technical Data Sheet

✓ Verified by PartsTable

— · ORING SEAL

WHAT YOU NEED TO KNOW

Material determines chemical compatibility Standard durometer is 70 Shore A

Wrong material = catastrophic seal failure

PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include material: PAPER OVERALL, hole_diameter: 0.344 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 4.000 INCHES NOMINAL IN, overall_length: 4.500 INCHES NOMINAL IN, style_designator: NON-CIRCULAR, cross-sectional_thickness: 0.090 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System under NSN 5330-00-736-5815, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

7365815

NSN: 5330-00-736-5815
FSC: 5330
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)

SPECIFICATIONS

material	PAPER OVERALL
hole_diameter	0.344 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
overall_width	4.000 INCHES NOMINAL IN
overall_length	4.500 INCHES NOMINAL IN
style_designator	NON-CIRCULAR
bolt_hole_quantity	2
cross-sectional_thickness	0.090 INCHES NOMINAL IN
cross-sectional_shape_style	SOLID SINGLE OR COMPOSITION
bolt_hole_centerline_to_nearest_edge_distance	1.875 INCHES NOMINAL IN
outside_edge_to_bolt_hole_center_distance_along_length	0.500 INCHES NOMINAL IN
center_to_center_distance_between_bolt_holes_along_length	3.500 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
NSN	5330-00-736-5815

COMPONENT DIAGRAM

KEY FEATURES

•

CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION

•

CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH: 3.500 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN

•

OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH: 0.500 INCHES NOMINAL IN

•

BOLT HOLE CENTERLINE TO NEAREST EDGE DISTANCE: 1.875 INCHES NOMINAL IN

•

MATERIAL: PAPER OVERALL

•

BOLT HOLE QUANTITY: 2

TECHNICAL CHARACTERISTICS

CROSS-SECTIONAL SHAPE STYLE	SOLID SINGLE OR COMPOSITION
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH	3.500 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
OVERALL WIDTH	4.000 INCHES NOMINAL IN
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH	0.500 INCHES NOMINAL IN
OVERALL LENGTH	4.500 INCHES NOMINAL IN
BOLT HOLE CENTERLINE TO NEAREST EDGE DISTANCE	1.875 INCHES NOMINAL IN
MATERIAL	PAPER OVERALL
BOLT HOLE QUANTITY	2
STYLE DESIGNATOR	NON-CIRCULAR
CROSS-SECTIONAL THICKNESS	0.090 INCHES NOMINAL IN

VERIFIED SUBSTITUTES & CROSS-REFERENCES 14

37T1UInterchangeableGOVERNMENT REGISTRY