PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 7365074
7365074 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,ROLLER,NEEDLE is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, bore_diameter: 0.8125 INCHES NOMINAL IN, overall_width: 0.5000 INCHES NOMINAL IN, alignment_type: RIGID, surface_finish: GROUND, style_designator: NON-SEPARABLE, OPEN END, DRAWN SHELL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-227-2716, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7365074
NSN: 3110-00-227-2716
FSC: 3110
CAGE: 00000
SPECIFICATIONS
materialSTEEL OVERALL
bore_diameter0.8125 INCHES NOMINAL IN
overall_width0.5000 INCHES NOMINAL IN
alignment_typeRIGID
surface_finishGROUND
style_designatorNON-SEPARABLE, OPEN END, DRAWN SHELL
overall_outside_diameter1.0625 INCHES NOMINAL IN
standard_tolerance_designationAFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
NSN3110-00-227-2716
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 7365074 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OVERALL OUTSIDE DIAMETER: 1.0625 INCHES NOMINAL IN
•
STYLE DESIGNATOR: NON-SEPARABLE, OPEN END, DRAWN SHELL
•
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
•
BORE DIAMETER: 0.8125 INCHES NOMINAL IN
•
ALIGNMENT TYPE: RIGID
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL OUTSIDE DIAMETER1.0625 INCHES NOMINAL IN
STYLE DESIGNATORNON-SEPARABLE, OPEN END, DRAWN SHELL
STANDARD TOLERANCE DESIGNATIONAFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
OVERALL WIDTH0.5000 INCHES NOMINAL IN
BORE DIAMETER0.8125 INCHES NOMINAL IN
ALIGNMENT TYPERIGID
VERIFIED SUBSTITUTES & CROSS-REFERENCES 14
0604387Interchangeable
interchangeable cross-reference
interchangeable
43312Interchangeable
interchangeable cross-reference
interchangeable
9A43312Interchangeable
interchangeable cross-reference
interchangeable
B-138-OHInterchangeable
interchangeable cross-reference
interchangeable
3110009021659Interchangeable
interchangeable cross-reference
interchangeable
7365074Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 7365074?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7365074?
7365074 is a BEARING,ROLLER,NEEDLE.
What parts can replace 7365074?
There are 14 known substitutes for 7365074: 0604387, 43312, 9A43312 and 11 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 7365074?
7365074 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-227-2716. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7365074

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026