PartsTable
Technical Data Sheet
Download PDF

7364920 — PIN,STRAIGHT,HEADLESS

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

7364920: PIN,STRAIGHT,HEADLESS.

The PIN,STRAIGHT,HEADLESS is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, surface_finish: 63.0 MICROINCHES OUTSIDE DIAMETER, first_end_style: CHAMFERED, surface_treatment: PHOSPHATE MANGANESE OVERALL, pin_overall_length: 5.500 INCHES MINIMUM AND 5.562 INCHES MAXIMUM IN, pin_overall_diameter: 0.4980 INCHES MINIMUM AND 0.4990 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5315-00-736-4920, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7364920
NSN: 5315-00-736-4920
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
materialSTEEL OVERALL
surface_finish63.0 MICROINCHES OUTSIDE DIAMETER
first_end_styleCHAMFERED
surface_treatmentPHOSPHATE MANGANESE OVERALL
pin_overall_length5.500 INCHES MINIMUM AND 5.562 INCHES MAXIMUM IN
pin_overall_diameter0.4980 INCHES MINIMUM AND 0.4990 INCHES MAXIMUM IN
first_end_taper_angle42.0 DEGREES MINIMUM AND 48.0 DEGREES MAXIMUM
first_end_taper_length0.031 INCHES MINIMUM AND 0.094 INCHES MAXIMUM IN
second_end_relationship_with_first_endIDENTICAL
surface_treatment_document_and_classificationMIL-C-16232,TYM,CL 2 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN5315-00-736-4920
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 7364920 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: 63.0 MICROINCHES OUTSIDE DIAMETER
•
FIRST END TAPER LENGTH: 0.031 INCHES MINIMUM AND 0.094 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-C-16232,TYM,CL 2 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
•
FIRST END STYLE: CHAMFERED
•
FIRST END TAPER ANGLE: 42.0 DEGREES MINIMUM AND 48.0 DEGREES MAXIMUM
•
PIN OVERALL DIAMETER: 0.4980 INCHES MINIMUM AND 0.4990 INCHES MAXIMUM IN
•
PIN OVERALL LENGTH: 5.500 INCHES MINIMUM AND 5.562 INCHES MAXIMUM IN
•
SECOND END RELATIONSHIP WITH FIRST END: IDENTICAL
TECHNICAL CHARACTERISTICS
SURFACE FINISH63.0 MICROINCHES OUTSIDE DIAMETER
FIRST END TAPER LENGTH0.031 INCHES MINIMUM AND 0.094 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-C-16232,TYM,CL 2 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
FIRST END STYLECHAMFERED
FIRST END TAPER ANGLE42.0 DEGREES MINIMUM AND 48.0 DEGREES MAXIMUM
PIN OVERALL DIAMETER0.4980 INCHES MINIMUM AND 0.4990 INCHES MAXIMUM IN
PIN OVERALL LENGTH5.500 INCHES MINIMUM AND 5.562 INCHES MAXIMUM IN
SECOND END RELATIONSHIP WITH FIRST ENDIDENTICAL
SPECIAL FEATURES0.0928 IN. MIN 0.0943 IN. MAX W BY 0.150 IN. MIN 0.154 IN. MAX DEPTH OF SLOT CENTER OF WHICH IS LOCATED 0.344 IN. FROM END AND 0.50 IN. MIN 0.061 IN. MAX DEPTH OF GROOVE CENTER OF WHICH IS LOCATED 0.344 IN. FROM A END 180 DEG FROM SLOT IN
SURFACE TREATMENTPHOSPHATE MANGANESE OVERALL
OTHER ITEMS IN FSC 5315 — Nails, Machine Keys, and Pins
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5315-00-000-1037 5315-00-000-1067 5315-00-000-1245 5315-00-000-1372 5315-00-000-1412 5315-00-001-1571 5315-00-001-1572 5315-00-001-1602
SUBSTITUTES & CROSS-REFERENCES 1
2300094-143010.02.0Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 7364920?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7364920?
7364920 is a PIN,STRAIGHT,HEADLESS.
What parts can replace 7364920?
There is 1 known substitute for 7364920: 2300094-143010.02.0. Substitute compatibility should be verified for your specific system.
What is the NSN for 7364920?
7364920 is cataloged in the U.S. Government catalog under NSN 5315-00-736-4920. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7364920

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.