PartsTable
Technical Data Sheet
Download PDF

7364748 — PIN,STRAIGHT,HEADLESS

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

7364748: PIN,STRAIGHT,HEADLESS.

The PIN,STRAIGHT,HEADLESS is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, first_end_style: CHAMFERED, special_features: 0.125 IN. BY 0.094 IN.

SLOT ON FACE OF A END IN, surface_treatment: CADMIUM OR CADMIUM OR CADMIUM OR CADMIUM AND CHROMATE OVERALL, pin_overall_length: 5.844 INCHES MINIMUM AND 5.906 INCHES MAXIMUM IN, first_hole_diameter: 0.156 INCHES MINIMUM AND 0.160 INCHES MAXIMUM IN. This part is cataloged in the U.S. Government catalog under NSN 5315-00-736-4748, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7364748
NSN: 5315-00-736-4748
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
materialSTEEL OVERALL
first_end_styleCHAMFERED
special_features0.125 IN. BY 0.094 IN. SLOT ON FACE OF A END IN
surface_treatmentCADMIUM OR CADMIUM OR CADMIUM OR CADMIUM AND CHROMATE OVERALL
pin_overall_length5.844 INCHES MINIMUM AND 5.906 INCHES MAXIMUM IN
first_hole_diameter0.156 INCHES MINIMUM AND 0.160 INCHES MAXIMUM IN
pin_overall_diameter0.7390 INCHES MINIMUM AND 0.7440 INCHES MAXIMUM IN
first_end_taper_angle45.0 DEGREES NOMINAL
first_end_taper_length0.031 INCHES MINIMUM AND 0.094 INCHES MAXIMUM IN
hole_arrangement_styleONE END DRILLED
second_end_relationship_with_first_endIDENTICAL
distance_from_centerline_of_hole_to_end_of_pin1.656 INCHES MINIMUM AND 1.719 INCHES MAXIMUM IN
NSN5315-00-736-4748
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 7364748 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FIRST END TAPER LENGTH: 0.031 INCHES MINIMUM AND 0.094 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 TY1 CL1 FED SPEC 1ST TREATMENT RESPONSE OR QQ-P-416 TY1 CL2 FED SPEC 2ND TREATMENT RESPONSE OR QQ-P-416 TY1 CL3 FED SPEC 3RD TREATMENT RESPONSE OR QQ-P-416 TY2 CL1 FED SPEC 4TH TREATMENT RESPONSE OVERALL
•
HOLE ARRANGEMENT STYLE: ONE END DRILLED
•
FIRST END STYLE: CHAMFERED
•
FIRST HOLE DIAMETER: 0.156 INCHES MINIMUM AND 0.160 INCHES MAXIMUM IN
•
FIRST END TAPER ANGLE: 45.0 DEGREES NOMINAL
•
PIN OVERALL DIAMETER: 0.7390 INCHES MINIMUM AND 0.7440 INCHES MAXIMUM IN
•
PIN OVERALL LENGTH: 5.844 INCHES MINIMUM AND 5.906 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
FIRST END TAPER LENGTH0.031 INCHES MINIMUM AND 0.094 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416 TY1 CL1 FED SPEC 1ST TREATMENT RESPONSE OR QQ-P-416 TY1 CL2 FED SPEC 2ND TREATMENT RESPONSE OR QQ-P-416 TY1 CL3 FED SPEC 3RD TREATMENT RESPONSE OR QQ-P-416 TY2 CL1 FED SPEC 4TH TREATMENT RESPONSE OVERALL
HOLE ARRANGEMENT STYLEONE END DRILLED
FIRST END STYLECHAMFERED
FIRST HOLE DIAMETER0.156 INCHES MINIMUM AND 0.160 INCHES MAXIMUM IN
FIRST END TAPER ANGLE45.0 DEGREES NOMINAL
PIN OVERALL DIAMETER0.7390 INCHES MINIMUM AND 0.7440 INCHES MAXIMUM IN
PIN OVERALL LENGTH5.844 INCHES MINIMUM AND 5.906 INCHES MAXIMUM IN
SECOND END RELATIONSHIP WITH FIRST ENDIDENTICAL
SPECIAL FEATURES0.125 IN. BY 0.094 IN. SLOT ON FACE OF A END IN
OTHER ITEMS IN FSC 5315 — Nails, Machine Keys, and Pins
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5315-00-000-1037 5315-00-000-1067 5315-00-000-1245 5315-00-000-1372 5315-00-000-1412 5315-00-001-1571 5315-00-001-1572 5315-00-001-1602
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 7364748?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7364748?
7364748 is a PIN,STRAIGHT,HEADLESS.
What is the NSN for 7364748?
7364748 is cataloged in the U.S. Government catalog under NSN 5315-00-736-4748. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7364748

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.