PartsTable
Technical Data Sheet
Download PDF

7363895 — KEY,MACHINE

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

7363895: KEY,MACHINE.

The KEY,MACHINE is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, overall_width: 0.998 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN, overall_height: 0.187 INCHES NOMINAL IN, overall_length: 1.000 INCHES NOMINAL IN, style_designator: PLAIN, key_chamfer_angle: 45.0 DEGREES NOMINAL. This part is cataloged in the U.S.

Government catalog under NSN 5315-00-736-3895, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7363895
NSN: 5315-00-736-3895
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 19204 — ARMY, UNITED STATES DEPARTMENT OF THE DBA ROCK ISLAND ARSENAL JMTC (USA)
SPECIFICATIONS
materialSTEEL OVERALL
overall_width0.998 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN
overall_height0.187 INCHES NOMINAL IN
overall_length1.000 INCHES NOMINAL IN
style_designatorPLAIN
key_chamfer_angle45.0 DEGREES NOMINAL
surface_treatmentPHOSPHATE ZINC OVERALL
key_chamfer_length0.062 INCHES NOMINAL IN
mounting_hole_depth0.031 INCHES NOMINAL IN
starting_edge_shapeCHAMFERED
mounting_hole_diameter0.281 INCHES NOMINAL IN
mounting_hole_type_and_quantity1 PLAIN
NSN5315-00-736-3895
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 7363895 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
KEY CHAMFER ANGLE: 45.0 DEGREES NOMINAL
•
MOUNTING HOLE TYPE AND QUANTITY: 1 PLAIN
•
STARTING EDGE SHAPE: CHAMFERED
•
STYLE DESIGNATOR: PLAIN
•
MOUNTING HOLE DIAMETER: 0.281 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.187 INCHES NOMINAL IN
KEY CHAMFER ANGLE45.0 DEGREES NOMINAL
MOUNTING HOLE TYPE AND QUANTITY1 PLAIN
STARTING EDGE SHAPECHAMFERED
STYLE DESIGNATORPLAIN
MOUNTING HOLE DIAMETER0.281 INCHES NOMINAL IN
OVERALL LENGTH1.000 INCHES NOMINAL IN
OVERALL WIDTH0.998 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN
DISTANCE FROM MOUNTING HOLE CENTER TO END0.343 INCHES NOMINAL IN
KEY CHAMFER LENGTH0.062 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5315 — Nails, Machine Keys, and Pins
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5315-00-000-1037 5315-00-000-1067 5315-00-000-1245 5315-00-000-1372 5315-00-000-1412 5315-00-001-1571 5315-00-001-1572 5315-00-001-1602
SUBSTITUTES & CROSS-REFERENCES 1
5315007363895Reference document
Same NSN cross-reference
Reference document — Informative reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 7363895?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7363895?
7363895 is a KEY,MACHINE.
What parts can replace 7363895?
There is 1 known substitute for 7363895: 5315007363895. Substitute compatibility should be verified for your specific system.
What is the NSN for 7363895?
7363895 is cataloged in the U.S. Government catalog under NSN 5315-00-736-3895. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7363895