PartsTable
Technical Data Sheet
Download PDF

73612-5CCM — WASHER,RECESSED

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

73612-5CCM: WASHER,RECESSED.

The WASHER,RECESSED is a the manufacturer industrial component. Key specifications include radius: 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN, material: STEEL COMP 4130 OR STEEL COMP 8740 OVERALL, hole_diameter: 0.417 INCHES MINIMUM AND 0.427 INCHES MAXIMUM IN, surface_finish: 63.0 MICROINCHES TOP, hardness_rating: 40.0 ROCKWELL C MINIMUM AND 46.0 ROCKWELL C MAXIMUM, outside_diameter: 0.608 INCHES MINIMUM AND 0.618 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-134-0757, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
73612-5CCM
NSN: 5310-01-134-0757
FSC: 5310 — Nuts and Washers
CAGE: 56878 — SPS TECHNOLOGIES, LLC DBA PB FASTENERS (USA)
SPECIFICATIONS
radius0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN
materialSTEEL COMP 4130 OR STEEL COMP 8740 OVERALL
hole_diameter0.417 INCHES MINIMUM AND 0.427 INCHES MAXIMUM IN
surface_finish63.0 MICROINCHES TOP
hardness_rating40.0 ROCKWELL C MINIMUM AND 46.0 ROCKWELL C MAXIMUM
outside_diameter0.608 INCHES MINIMUM AND 0.618 INCHES MAXIMUM IN
special_featuresDRY FILM LUBRICANT PS18021,CLASS 16
surface_treatmentCADMIUM AND CHROMATE OVERALL
material_thickness0.106 INCHES MINIMUM AND 0.126 INCHES MAXIMUM IN
material_document_and_classificationMIL-S-6758 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-18729 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE OR AMS 6358 ASSN STD 2ND MATERIAL RESPONSE OVERALL
surface_treatment_document_and_classificationQQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN5310-01-134-0757
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 73612-5CCM · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: 63.0 MICROINCHES TOP
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
RADIUS: 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN
•
HARDNESS RATING: 40.0 ROCKWELL C MINIMUM AND 46.0 ROCKWELL C MAXIMUM
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-6758 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-18729 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE OR AMS 6358 ASSN STD 2ND MATERIAL RESPONSE OVERALL
•
OUTSIDE DIAMETER: 0.608 INCHES MINIMUM AND 0.618 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.106 INCHES MINIMUM AND 0.126 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
SURFACE FINISH63.0 MICROINCHES TOP
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
RADIUS0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN
HARDNESS RATING40.0 ROCKWELL C MINIMUM AND 46.0 ROCKWELL C MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-6758 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-18729 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE OR AMS 6358 ASSN STD 2ND MATERIAL RESPONSE OVERALL
OUTSIDE DIAMETER0.608 INCHES MINIMUM AND 0.618 INCHES MAXIMUM IN
MATERIAL THICKNESS0.106 INCHES MINIMUM AND 0.126 INCHES MAXIMUM IN
SPECIAL FEATURESDRY FILM LUBRICANT PS18021,CLASS 16
SURFACE TREATMENTCADMIUM AND CHROMATE OVERALL
MATERIALSTEEL COMP 4130 OR STEEL COMP 8740 OVERALL
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES 3
10109700Reference document
Same NSN cross-reference
Reference document — Informative reference only
4M226B5MReference document
Same NSN cross-reference
Reference document — Secondary reference
79684-CCM-5Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 73612-5CCM?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 73612-5CCM?
73612-5CCM is a WASHER,RECESSED.
What parts can replace 73612-5CCM?
There are 3 known substitutes for 73612-5CCM: 10109700, 4M226B5M, 79684-CCM-5. Substitute compatibility should be verified for your specific system.
What is the NSN for 73612-5CCM?
73612-5CCM is cataloged in the U.S. Government catalog under NSN 5310-01-134-0757. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 73612-5CCM

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.