PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 735610
735610 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, hole_diameter: 0.312 INCHES NOMINAL IN, outside_diameter: 0.625 INCHES NOMINAL IN, style_designator: SPLIT HELICAL-RIGHT HAND, surface_treatment: CADMIUM OR NICKEL OR ZINC OVERALL, material_thickness: 0.020 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-144-3953, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
735610
NSN: 5305-00-144-3953
FSC: 5305
CAGE: 43999 — THE BOEING COMPANY DIV LEGACY AM&M (USA)
SPECIFICATIONS
materialSTEEL OVERALL
hole_diameter0.312 INCHES NOMINAL IN
outside_diameter0.625 INCHES NOMINAL IN
style_designatorSPLIT HELICAL-RIGHT HAND
surface_treatmentCADMIUM OR NICKEL OR ZINC OVERALL
material_thickness0.020 INCHES NOMINAL IN
NSN5305-00-144-3953
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 735610 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD DIRECTION: RIGHT-HAND
•
HEAD STYLE: FLAT COUNTERSUNK
•
HEAD DIAMETER: 0.238 INCHES MINIMUM AND 0.279 INCHES MAXIMUM IN
•
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
•
THREAD SERIES DESIGNATOR: UNIFIED NATIONAL COARSE (UNC)
•
INTERNAL DRIVE STYLE: CROSS RECESS TYPE 1
•
NOMINAL THREAD DIAMETER: 0.138 INCHES IN
•
FASTENER LENGTH: 0.625 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
THREAD DIRECTIONRIGHT-HAND
HEAD STYLEFLAT COUNTERSUNK
HEAD DIAMETER0.238 INCHES MINIMUM AND 0.279 INCHES MAXIMUM IN
COUNTERSINK ANGLE99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
THREAD SERIES DESIGNATORUNIFIED NATIONAL COARSE (UNC)
INTERNAL DRIVE STYLECROSS RECESS TYPE 1
NOMINAL THREAD DIAMETER0.138 INCHES IN
FASTENER LENGTH0.625 INCHES NOMINAL IN
SCREW MATERIALSTEEL
NONDEFINITIVE SPEC/STD DATA3 TYPE AND 3C STYLE AND 1 DESIGN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
B340Interchangeable
interchangeable cross-reference
interchangeable
735610Interchangeable
interchangeable cross-reference
interchangeable
PL10300-60-2 ITEM 10Interchangeable
interchangeable cross-reference
interchangeable
FFS92Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 735610?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 735610?
735610 is a SCREW,MACHINE.
What parts can replace 735610?
There are 4 known substitutes for 735610: B340, 735610, PL10300-60-2 ITEM 10 and 1 more. Substitute compatibility should be verified for your specific system.
Is 735610 still available?
735610 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 735610

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026