PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 7355036
7355036 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The HANDLE,DOOR is a the manufacturer industrial component. Key specifications include height: 0.500 INCHES NOMINAL IN, material: STEEL CORROSION RESISTING OVERALL, plate_width: 1.312 INCHES NOMINAL IN, plate_length: 2.250 INCHES NOMINAL IN, shaft_length: 3.875 INCHES NOMINAL IN, handle_height: 2.188 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-582-2048, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7355036
NSN: 5340-00-582-2048
FSC: 5340
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
height0.500 INCHES NOMINAL IN
materialSTEEL CORROSION RESISTING OVERALL
plate_width1.312 INCHES NOMINAL IN
plate_length2.250 INCHES NOMINAL IN
shaft_length3.875 INCHES NOMINAL IN
handle_height2.188 INCHES NOMINAL IN
hole_diameter0.196 INCHES NOMINAL IN
overall_length5.188 INCHES NOMINAL IN
handle_clearance1.000 INCHES NOMINAL IN
style_designatorL
features_providedESCUTCHEON PLATE FIXED
square_shaft_width0.312 INCHES NOMINAL IN
NSN5340-00-582-2048
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 7355036 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEIGHT: 0.500 INCHES NOMINAL IN
•
HANDLE CLEARANCE: 1.000 INCHES NOMINAL IN
•
SQUARE SHAFT WIDTH: 0.312 INCHES NOMINAL IN
•
PLATE WIDTH: 1.312 INCHES NOMINAL IN
•
STYLE DESIGNATOR: L
•
HOLE DIAMETER: 0.196 INCHES NOMINAL IN
•
INTEGRAL SHAFT STYLE: SQUARE
•
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH: 1.500 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
HEIGHT0.500 INCHES NOMINAL IN
HANDLE CLEARANCE1.000 INCHES NOMINAL IN
SQUARE SHAFT WIDTH0.312 INCHES NOMINAL IN
PLATE WIDTH1.312 INCHES NOMINAL IN
STYLE DESIGNATORL
HOLE DIAMETER0.196 INCHES NOMINAL IN
INTEGRAL SHAFT STYLESQUARE
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH1.500 INCHES NOMINAL IN
FEATURES PROVIDEDESCUTCHEON PLATE FIXED
SHAFT LENGTH3.875 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
RME-U-0190Interchangeable
interchangeable cross-reference
interchangeable
5551Interchangeable
interchangeable cross-reference
interchangeable
460A400FNInterchangeable
interchangeable cross-reference
interchangeable
350W525Interchangeable
interchangeable cross-reference
interchangeable
14U1484PCDD5551Interchangeable
interchangeable cross-reference
interchangeable
MULTIGRADE FB SWInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 7355036?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7355036?
7355036 is a HANDLE,DOOR.
What parts can replace 7355036?
There are 10 known substitutes for 7355036: RME-U-0190, 5551, 460A400FN and 7 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 7355036?
7355036 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-582-2048. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7355036

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026