PartsTable
Technical Data Sheet
Download PDF

7351303 — CLIP,SPRING TENSION

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

7351303: CLIP,SPRING TENSION.

The CLIP,SPRING TENSION is a the manufacturer industrial component. Key specifications include width: 0.625 INCHES NOMINAL IN, length: 1.331 INCHES NOMINAL IN, material: STEEL OVERALL, hole_diameter: 0.406 INCHES NOMINAL IN, surface_treatment: PAINT OVERALL, loop_opening_width: 0.438 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-423-2762, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7351303
NSN: 5340-00-423-2762
FSC: 5340 — Hardware, Commercial
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
width0.625 INCHES NOMINAL IN
length1.331 INCHES NOMINAL IN
materialSTEEL OVERALL
hole_diameter0.406 INCHES NOMINAL IN
surface_treatmentPAINT OVERALL
loop_opening_width0.438 INCHES NOMINAL IN
material_thickness0.050 INCHES NOMINAL IN
loop/holding_dimension0.438 INCHES NOMINAL IN
NSN5340-00-423-2762
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 7351303 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 1.331 INCHES NOMINAL IN
•
LOOP/HOLDING DIMENSION: 0.438 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.050 INCHES NOMINAL IN
•
LOOP OPENING WIDTH: 0.438 INCHES NOMINAL IN
•
SURFACE TREATMENT: PAINT OVERALL
•
WIDTH: 0.625 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
•
HOLE DIAMETER: 0.406 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
LENGTH1.331 INCHES NOMINAL IN
LOOP/HOLDING DIMENSION0.438 INCHES NOMINAL IN
MATERIAL THICKNESS0.050 INCHES NOMINAL IN
LOOP OPENING WIDTH0.438 INCHES NOMINAL IN
SURFACE TREATMENTPAINT OVERALL
WIDTH0.625 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
HOLE DIAMETER0.406 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 7351303?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7351303?
7351303 is a CLIP,SPRING TENSION.
What is the NSN for 7351303?
7351303 is cataloged in the U.S. Government catalog under NSN 5340-00-423-2762. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7351303

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.