PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 7351074
7351074 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include material: PAPER AND GLUE OVERALL, hole_diameter: 0.344 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 1.188 INCHES NOMINAL IN, aperture_width: 0.625 INCHES NOMINAL IN, overall_length: 2.500 INCHES NOMINAL IN, aperture_length: 0.750 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-215-3867, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7351074
NSN: 5330-00-215-3867
FSC: 5330
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
materialPAPER AND GLUE OVERALL
hole_diameter0.344 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
overall_width1.188 INCHES NOMINAL IN
aperture_width0.625 INCHES NOMINAL IN
overall_length2.500 INCHES NOMINAL IN
aperture_length0.750 INCHES NOMINAL IN
style_designatorNON-CIRCULAR
inside_corner_radius0.125 INCHES NOMINAL IN
cross-sectional_thickness0.031 INCHES NOMINAL IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
material_document_and_classificationMIL-G-12803,NO. +3313-B MIL SPEC ALL MATERIAL RESPONSES OVERALL
center_to_center_distance_between_bolt_holes_along_length1.875 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
NSN5330-00-215-3867
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 7351074 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
MATERIAL: PAPER AND GLUE OVERALL
•
INSIDE CORNER RADIUS: 0.125 INCHES NOMINAL IN
•
CROSS-SECTIONAL THICKNESS: 0.031 INCHES NOMINAL IN
•
APERTURE WIDTH: 0.625 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-12803,NO. +3313-B MIL SPEC ALL MATERIAL RESPONSES OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
MATERIALPAPER AND GLUE OVERALL
INSIDE CORNER RADIUS0.125 INCHES NOMINAL IN
OVERALL WIDTH1.188 INCHES NOMINAL IN
CROSS-SECTIONAL THICKNESS0.031 INCHES NOMINAL IN
APERTURE WIDTH0.625 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-G-12803,NO. +3313-B MIL SPEC ALL MATERIAL RESPONSES OVERALL
OVERALL LENGTH2.500 INCHES NOMINAL IN
STYLE DESIGNATORNON-CIRCULAR
HOLE DIAMETER0.344 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 21
119639Interchangeable
interchangeable cross-reference
interchangeable
710860-43Interchangeable
interchangeable cross-reference
interchangeable
8423Interchangeable
interchangeable cross-reference
interchangeable
24-315Interchangeable
interchangeable cross-reference
interchangeable
P2430-015Interchangeable
interchangeable cross-reference
interchangeable
2430-015Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 7351074?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7351074?
7351074 is a GASKET.
What parts can replace 7351074?
There are 21 known substitutes for 7351074: 119639, 710860-43, 8423 and 18 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 7351074?
7351074 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-215-3867. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7351074

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026