PartsTable
Technical Data Sheet
Download PDF

7350431 — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

7350431: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include material: PAPER AND GLUE OVERALL, hole_diameter: 0.469 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 4.500 INCHES NOMINAL IN, aperture_width: 3.500 INCHES NOMINAL IN, overall_length: 7.250 INCHES NOMINAL IN, aperture_length: 4.469 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-735-0431, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7350431
NSN: 5330-00-735-0431
FSC: 5330 — Packing and Gasket Materials
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
materialPAPER AND GLUE OVERALL
hole_diameter0.469 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
overall_width4.500 INCHES NOMINAL IN
aperture_width3.500 INCHES NOMINAL IN
overall_length7.250 INCHES NOMINAL IN
aperture_length4.469 INCHES NOMINAL IN
special_featuresTWO POSITIONING HOLE 0.312 IN. DIA IN
style_designatorNON-CIRCULAR
bolt_hole_quantity4
inside_corner_radius0.625 INCHES NOMINAL IN
outside_corner_radius0.438 INCHES NOMINAL IN
cross-sectional_thickness0.031 INCHES NOMINAL IN
NSN5330-00-735-0431
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 7350431 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.031 INCHES NOMINAL IN
•
INSIDE CORNER RADIUS: 0.625 INCHES NOMINAL IN
•
STYLE DESIGNATOR: NON-CIRCULAR
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-12803,NO. +3313-B MIL SPEC ALL MATERIAL RESPONSES OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
APERTURE WIDTH: 3.500 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.031 INCHES NOMINAL IN
INSIDE CORNER RADIUS0.625 INCHES NOMINAL IN
STYLE DESIGNATORNON-CIRCULAR
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-G-12803,NO. +3313-B MIL SPEC ALL MATERIAL RESPONSES OVERALL
OVERALL LENGTH7.250 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
OVERALL WIDTH4.500 INCHES NOMINAL IN
APERTURE WIDTH3.500 INCHES NOMINAL IN
APERTURE LENGTH4.469 INCHES NOMINAL IN
BOLT HOLE QUANTITY4
SUBSTITUTES & CROSS-REFERENCES 3
2179929Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
N11025Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
N7284Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 7350431?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7350431?
7350431 is a GASKET.
What parts can replace 7350431?
There are 3 known substitutes for 7350431: 2179929, N11025, N7284. Substitute compatibility should be verified for your specific system.
What is the NSN for 7350431?
7350431 is cataloged in the U.S. Government catalog under NSN 5330-00-735-0431. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7350431