PartsTable
Technical Data Sheet
Download PDF

7350286 — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

7350286: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include material: RUBBER NATURAL OR RUBBER SYNTHETIC OVERALL, hole_diameter: 0.219 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 4.312 INCHES NOMINAL IN, aperture_width: 3.188 INCHES NOMINAL IN, overall_length: 4.812 INCHES NOMINAL IN, aperture_length: 3.406 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-735-0286, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7350286
NSN: 5330-00-735-0286
FSC: 5330 — Packing and Gasket Materials
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
materialRUBBER NATURAL OR RUBBER SYNTHETIC OVERALL
hole_diameter0.219 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
overall_width4.312 INCHES NOMINAL IN
aperture_width3.188 INCHES NOMINAL IN
overall_length4.812 INCHES NOMINAL IN
aperture_length3.406 INCHES NOMINAL IN
inside_corner_radius0.266 INCHES NOMINAL IN
outside_corner_radius0.188 INCHES NOMINAL IN
cross-sectional_thickness0.109 INCHES MINIMUM AND 0.141 INCHES MAXIMUM IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
center_to_center_distance_between_bolt_holes_along_width3.750 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
center_to_center_distance_between_bolt_holes_along_length4.188 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
NSN5330-00-735-0286
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 7350286 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.109 INCHES MINIMUM AND 0.141 INCHES MAXIMUM IN
•
INSIDE CORNER RADIUS: 0.266 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
APERTURE WIDTH: 3.188 INCHES NOMINAL IN
•
APERTURE LENGTH: 3.406 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH: 4.188 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.109 INCHES MINIMUM AND 0.141 INCHES MAXIMUM IN
INSIDE CORNER RADIUS0.266 INCHES NOMINAL IN
OVERALL LENGTH4.812 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
OVERALL WIDTH4.312 INCHES NOMINAL IN
APERTURE WIDTH3.188 INCHES NOMINAL IN
APERTURE LENGTH3.406 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH4.188 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH3.750 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
OUTSIDE CORNER RADIUS0.188 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5330 — Packing and Gasket Materials
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5330-00-000-0085 5330-00-000-0167 5330-00-000-5275 5330-00-001-1260 5330-00-001-1833 5330-00-001-1844 5330-00-001-1845 5330-00-001-1846
SUBSTITUTES & CROSS-REFERENCES 1
1273992Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 7350286?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7350286?
7350286 is a GASKET.
What parts can replace 7350286?
There is 1 known substitute for 7350286: 1273992. Substitute compatibility should be verified for your specific system.
What is the NSN for 7350286?
7350286 is cataloged in the U.S. Government catalog under NSN 5330-00-735-0286. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7350286

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.