PartsTable
Technical Data Sheet
Download PDF

7349389 — RETAINER,PACKING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

7349389: RETAINER,PACKING.

The RETAINER,PACKING is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, peripheral_diameter: 2.749 INCHES MINIMUM AND 2.754 INCHES MAXIMUM IN, body_recess_diameter: 2.063 INCHES NOMINAL IN, center_hole_diameter: 1.281 INCHES NOMINAL IN, cross-sectional_height: 0.328 INCHES NOMINAL IN, cross-sectional_thickness: 0.078 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-424-1424, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7349389
NSN: 5330-00-424-1424
FSC: 5330 — Packing and Gasket Materials
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
materialSTEEL OVERALL
peripheral_diameter2.749 INCHES MINIMUM AND 2.754 INCHES MAXIMUM IN
body_recess_diameter2.063 INCHES NOMINAL IN
center_hole_diameter1.281 INCHES NOMINAL IN
cross-sectional_height0.328 INCHES NOMINAL IN
cross-sectional_thickness0.078 INCHES NOMINAL IN
flanged_body_outside_diameter2.212 INCHES NOMINAL IN
NSN5330-00-424-1424
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 7349389 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.078 INCHES NOMINAL IN
•
CROSS-SECTIONAL HEIGHT: 0.328 INCHES NOMINAL IN
•
BODY RECESS DIAMETER: 2.063 INCHES NOMINAL IN
•
FLANGED BODY OUTSIDE DIAMETER: 2.212 INCHES NOMINAL IN
•
PERIPHERAL DIAMETER: 2.749 INCHES MINIMUM AND 2.754 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 1.281 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.078 INCHES NOMINAL IN
CROSS-SECTIONAL HEIGHT0.328 INCHES NOMINAL IN
BODY RECESS DIAMETER2.063 INCHES NOMINAL IN
FLANGED BODY OUTSIDE DIAMETER2.212 INCHES NOMINAL IN
PERIPHERAL DIAMETER2.749 INCHES MINIMUM AND 2.754 INCHES MAXIMUM IN
CENTER HOLE DIAMETER1.281 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
OTHER ITEMS IN FSC 5330 — Packing and Gasket Materials
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5330-00-000-0085 5330-00-000-0167 5330-00-000-5275 5330-00-001-1260 5330-00-001-1833 5330-00-001-1844 5330-00-001-1845 5330-00-001-1846
SUBSTITUTES & CROSS-REFERENCES 1
534731Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 7349389?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7349389?
7349389 is a RETAINER,PACKING.
What parts can replace 7349389?
There is 1 known substitute for 7349389: 534731. Substitute compatibility should be verified for your specific system.
What is the NSN for 7349389?
7349389 is cataloged in the U.S. Government catalog under NSN 5330-00-424-1424. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7349389