PartsTable
Technical Data Sheet
Download PDF

7349072 — LOCKING PLATE,NUT AND BOLT

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

7349072: LOCKING PLATE,NUT AND BOLT.

The LOCKING PLATE,NUT AND BOLT is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, first_end_style: CHAMFERED, hardness_rating: 50.0 ROCKWELL C MINIMUM AND 64.0 ROCKWELL C MAXIMUM OVERALL, second_end_style: RADIUS, features_provided: CASEHARDENED, surface_treatment: CADMIUM OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-734-9072, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7349072
NSN: 5340-00-734-9072
NIINs: 007349072, 008052978
FSC: 5340 — Hardware, Commercial
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
materialSTEEL OVERALL
first_end_styleCHAMFERED
hardness_rating50.0 ROCKWELL C MINIMUM AND 64.0 ROCKWELL C MAXIMUM OVERALL
second_end_styleRADIUS
features_providedCASEHARDENED
surface_treatmentCADMIUM OVERALL
pin_overall_length0.500 INCHES NOMINAL IN
pin_overall_diameter0.1250 INCHES NOMINAL IN
first_end_taper_angle5.0 DEGREES NOMINAL
first_end_taper_length0.019 INCHES NOMINAL IN
second_end_corner_radius0.051 INCHES NOMINAL IN
second_end_relationship_with_first_endNOT IDENTICAL
NSN5340-00-734-9072
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 7349072 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FSC APPLICATION DATA: DIFFERENTIAL LOCKNUTS,VEHICULAR
•
PLATE THICKNESS: 0.045 INCHES NOMINAL IN
•
DISTANCE BETWEEN MOUNTING HOLE CENTERS: 1.520 INCHES MINIMUM AND 1.530 INCHES MAXIMUM IN
•
ANGLE BETWEEN EARS IN DEG: 90.0
•
BODY WIDTH: 0.750 INCHES NOMINAL IN
•
STYLE DESIGNATOR: STRAIGHT
•
MOUNTING HOLE DIAMETER: 0.375 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN
•
ANGLE FROM HORIZONTAL CENTERLINE TO EAR IN DEG: 90.0
TECHNICAL CHARACTERISTICS
FSC APPLICATION DATADIFFERENTIAL LOCKNUTS,VEHICULAR
PLATE THICKNESS0.045 INCHES NOMINAL IN
DISTANCE BETWEEN MOUNTING HOLE CENTERS1.520 INCHES MINIMUM AND 1.530 INCHES MAXIMUM IN
ANGLE BETWEEN EARS IN DEG90.0
BODY WIDTH0.750 INCHES NOMINAL IN
STYLE DESIGNATORSTRAIGHT
MOUNTING HOLE DIAMETER0.375 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN
ANGLE FROM HORIZONTAL CENTERLINE TO EAR IN DEG90.0
CROSS-SECTIONAL SHAPE STYLEFLAT
WIDTH0.844 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 1
601859Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 7349072?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7349072?
7349072 is a LOCKING PLATE,NUT AND BOLT.
What parts can replace 7349072?
There is 1 known substitute for 7349072: 601859. Substitute compatibility should be verified for your specific system.
What is the NSN for 7349072?
7349072 is cataloged in the U.S. Government catalog under NSN 5340-00-734-9072. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7349072