PartsTable
Technical Data Sheet
Download PDF

7348688 — HOOK,SUPPORT

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

7348688: HOOK,SUPPORT.

The HOOK,SUPPORT is a the manufacturer industrial component. Key specifications include material: STEEL, overall_height: 3.000 INCHES NOMINAL IN, special_features: TYPE B HOOK HAS THICKNESS OF 0.164 IN. IN, material_diameter: 0.312 INCHES NOMINAL IN, surface_treatment: PHOSPHATE, material_thickness: 0.312 INCHES NOMINAL IN.

This part is cataloged in the U.S. Government catalog under NSN 5340-00-456-1011, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7348688
NSN: 5340-00-456-1011
FSC: 5340 — Hardware, Commercial
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
materialSTEEL
overall_height3.000 INCHES NOMINAL IN
special_featuresTYPE B HOOK HAS THICKNESS OF 0.164 IN. IN
material_diameter0.312 INCHES NOMINAL IN
surface_treatmentPHOSPHATE
material_thickness0.312 INCHES NOMINAL IN
mounting_hole_diameter0.328 INCHES NOMINAL IN
mounting_hole_quantity2
end_item_identificationMRAP - COUGAR
overall_length_from_mounting_surface1.625 INCHES NOMINAL IN
NSN5340-00-456-1011
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 7348688 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING HOLE QUANTITY: 2
•
MATERIAL DIAMETER: 0.312 INCHES NOMINAL IN
•
MOUNTING HOLE DIAMETER: 0.328 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.312 INCHES NOMINAL IN
•
OVERALL LENGTH FROM MOUNTING SURFACE: 1.625 INCHES NOMINAL IN
•
SURFACE TREATMENT: PHOSPHATE
TECHNICAL CHARACTERISTICS
MOUNTING HOLE QUANTITY2
OVERALL HEIGHT3.000 INCHES NOMINAL IN
MATERIAL DIAMETER0.312 INCHES NOMINAL IN
MOUNTING HOLE DIAMETER0.328 INCHES NOMINAL IN
MATERIAL THICKNESS0.312 INCHES NOMINAL IN
OVERALL LENGTH FROM MOUNTING SURFACE1.625 INCHES NOMINAL IN
SPECIAL FEATURESTYPE B HOOK HAS THICKNESS OF 0.164 IN. IN
SURFACE TREATMENTPHOSPHATE
END ITEM IDENTIFICATIONMRAP - COUGAR
MATERIALSTEEL
SUBSTITUTES & CROSS-REFERENCES 6
1239N2Reference document
Same NSN cross-reference
Reference document — Secondary reference
2146061Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
2173982Reference document
Same NSN cross-reference
Reference document — Secondary reference
SCAX4 TY A OR TY BReference document
Same NSN cross-reference
Reference document — Secondary reference
GTB1350314AReference document
Same NSN cross-reference
Reference document — Secondary reference
5840004561011Reference document
Same NSN cross-reference
Reference document — Informative reference only
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 7348688?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7348688?
7348688 is a HOOK,SUPPORT.
What parts can replace 7348688?
There are 6 known substitutes for 7348688: 1239N2, 2146061, 2173982 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 7348688?
7348688 is cataloged in the U.S. Government catalog under NSN 5340-00-456-1011. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7348688