PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 7347754
7347754 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLIP,ROD RETAINER is a the manufacturer industrial component. Key specifications include width: 0.150 INCHES NOMINAL IN, material: STEEL, overall_height: 0.312 INCHES NOMINAL IN, overall_length: 0.605 INCHES NOMINAL IN, style_designator: END CLASP, surface_treatment: CHROMATE. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-734-7754, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7347754
NSN: 5340-00-734-7754
FSC: 5340
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
width0.150 INCHES NOMINAL IN
materialSTEEL
overall_height0.312 INCHES NOMINAL IN
overall_length0.605 INCHES NOMINAL IN
style_designatorEND CLASP
surface_treatmentCHROMATE
unit_package_quantity100
accommodated_rod_diameter0.168 INCHES NOMINAL IN
NSN5340-00-734-7754
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 7347754 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
UNIT PACKAGE QUANTITY: 100
•
ACCOMMODATED ROD DIAMETER: 0.168 INCHES NOMINAL IN
•
STYLE DESIGNATOR: END CLASP
•
SURFACE TREATMENT: CHROMATE
•
MATERIAL: STEEL
•
WIDTH: 0.150 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL HEIGHT0.312 INCHES NOMINAL IN
UNIT PACKAGE QUANTITY100
ACCOMMODATED ROD DIAMETER0.168 INCHES NOMINAL IN
STYLE DESIGNATOREND CLASP
SURFACE TREATMENTCHROMATE
MATERIALSTEEL
WIDTH0.150 INCHES NOMINAL IN
OVERALL LENGTH0.605 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 14
17221Upgraded Successor
successor cross-reference
successor
AES01F500D50WA2D71Upgraded Successor
successor cross-reference
successor
T3099Upgraded Successor
successor cross-reference
successor
A-2902Interchangeable
interchangeable cross-reference
interchangeable
99132860Interchangeable
interchangeable cross-reference
interchangeable
GP3148AInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 7347754?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7347754?
7347754 is a CLIP,ROD RETAINER.
What parts can replace 7347754?
There are 14 known substitutes for 7347754: 17221, AES01F500D50WA2D71, T3099 and 11 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 7347754?
7347754 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-734-7754. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7347754

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026