PartsTable
Technical Data Sheet
Download PDF

7347592 — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

7347592: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include material: RUBBER POLYSULFIDE CLASS T OVERALL, hole_diameter: 0.406 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, outside_diameter: 7.594 INCHES NOMINAL IN, special_features: ONE CUTOUT ON ID 0.625 INCH WIDE BY 0.406 INCH DEPTH IN, aperture_diameter: 5.938 INCHES NOMINAL IN, bolt_circle_diameter: 6.563 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-097-8248, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7347592
NSN: 5330-01-097-8248
FSC: 5330 — Packing and Gasket Materials
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
materialRUBBER POLYSULFIDE CLASS T OVERALL
hole_diameter0.406 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
outside_diameter7.594 INCHES NOMINAL IN
special_featuresONE CUTOUT ON ID 0.625 INCH WIDE BY 0.406 INCH DEPTH IN
aperture_diameter5.938 INCHES NOMINAL IN
bolt_hole_quantity6
bolt_circle_diameter6.563 INCHES NOMINAL IN
cross-sectional_thickness0.029 INCHES MINIMUM AND 0.033 INCHES MAXIMUM IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
material_document_and_classificationMIL-G-12803,F326128-6 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN5330-01-097-8248
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 7347592 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.029 INCHES MINIMUM AND 0.033 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-12803,F326128-6 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
OUTSIDE DIAMETER: 7.594 INCHES NOMINAL IN
•
APERTURE DIAMETER: 5.938 INCHES NOMINAL IN
•
BOLT HOLE QUANTITY: 6
•
BOLT CIRCLE DIAMETER: 6.563 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.029 INCHES MINIMUM AND 0.033 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-G-12803,F326128-6 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
OUTSIDE DIAMETER7.594 INCHES NOMINAL IN
APERTURE DIAMETER5.938 INCHES NOMINAL IN
BOLT HOLE QUANTITY6
BOLT CIRCLE DIAMETER6.563 INCHES NOMINAL IN
SPECIAL FEATURESONE CUTOUT ON ID 0.625 INCH WIDE BY 0.406 INCH DEPTH IN
MATERIALRUBBER POLYSULFIDE CLASS T OVERALL
HOLE DIAMETER0.406 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
OTHER ITEMS IN FSC 5330 — Packing and Gasket Materials
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5330-00-000-0085 5330-00-000-0167 5330-00-000-5275 5330-00-001-1260 5330-00-001-1833 5330-00-001-1844 5330-00-001-1845 5330-00-001-1846
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 7347592?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7347592?
7347592 is a GASKET.
What is the NSN for 7347592?
7347592 is cataloged in the U.S. Government catalog under NSN 5330-01-097-8248. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7347592