PartsTable
Technical Data Sheet

734684-5 — Technical Data Sheet

✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The MICROCIRCUIT,DIGITAL is a the manufacturer industrial component. Key specifications include cushion: NOT INCLUDED, material: STEEL LOCATION NOT OTHERWISE SPECIFIED, mounting_pad: NOT INCLUDED, overall_width: 0.375 INCHES NOMINAL IN, overall_length: 1.938 INCHES NOMINAL IN, surface_treatment: ZINC. This part is cataloged in the Federal Logistics Information System under NSN 5340-00-243-6446, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
734684-5
NSN: 5340-00-243-6446
FSC: 5340
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
cushionNOT INCLUDED
materialSTEEL LOCATION NOT OTHERWISE SPECIFIED
mounting_padNOT INCLUDED
overall_width0.375 INCHES NOMINAL IN
overall_length1.938 INCHES NOMINAL IN
surface_treatmentZINC
material_thickness0.023 INCHES NOMINAL IN
inside_diameter/arch_length0.219 INCHES NOMINAL IN
distance_between_base_and_inside_of_arch0.234375 INCHES NOMINAL IN
NSN5340-00-243-6446
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 734684-5 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL THICKNESS: 0.023 INCHES NOMINAL IN
•
SURFACE TREATMENT: ZINC
•
MATERIAL: STEEL LOCATION NOT OTHERWISE SPECIFIED
•
MOUNTING PAD: NOT INCLUDED
•
INSIDE DIAMETER/ARCH LENGTH: 0.219 INCHES NOMINAL IN
•
DISTANCE BETWEEN BASE AND INSIDE OF ARCH: 0.234375 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
MATERIAL THICKNESS0.023 INCHES NOMINAL IN
SURFACE TREATMENTZINC
MATERIALSTEEL LOCATION NOT OTHERWISE SPECIFIED
MOUNTING PADNOT INCLUDED
OVERALL LENGTH1.938 INCHES NOMINAL IN
INSIDE DIAMETER/ARCH LENGTH0.219 INCHES NOMINAL IN
OVERALL WIDTH0.375 INCHES NOMINAL IN
DISTANCE BETWEEN BASE AND INSIDE OF ARCH0.234375 INCHES NOMINAL IN
CUSHIONNOT INCLUDED
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
736336InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
734684-4InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
1878504InterchangeableGOVERNMENT REGISTRY
Same NIIN cross-reference
interchangeable
14G528InterchangeableGOVERNMENT REGISTRY
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusCANCELLEDGOVERNMENT REGISTRY
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 734684-5?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 734684-5?
734684-5 is a MICROCIRCUIT,DIGITAL.
What parts can replace 734684-5?
There are 4 known substitutes for 734684-5: 736336, 734684-4, 1878504 and 1 more. Substitute compatibility should be verified for your specific system.
Is 734684-5 still available?
734684-5 is currently cancelled.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 734684-5