PartsTable
Technical Data Sheet
Download PDF

7342688 — CLAMP,LOOP

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

7342688: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.375 INCHES NOMINAL IN, material: STEEL BAND, overall_width: 0.813 INCHES NOMINAL IN, special_features: 1 SELF-LOCKING INTEGRAL NUT, style_designator: TWO PIECE, tongue_hole_type: ROUND, UNTHREADED. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-734-2688, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7342688
NSN: 5340-00-734-2688
FSC: 5340 — Hardware, Commercial
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
diameter0.375 INCHES NOMINAL IN
materialSTEEL BAND
overall_width0.813 INCHES NOMINAL IN
special_features1 SELF-LOCKING INTEGRAL NUT
style_designatorTWO PIECE
tongue_hole_typeROUND, UNTHREADED
material_thickness0.250 INCHES NOMINAL IN
loop_inside_diameter2.188 INCHES NOMINAL IN
NSN5340-00-734-2688
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 7342688 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: TWO PIECE
•
DIAMETER: 0.375 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.250 INCHES NOMINAL IN
•
TONGUE HOLE TYPE: ROUND, UNTHREADED
•
MATERIAL: STEEL BAND
•
LOOP INSIDE DIAMETER: 2.188 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORTWO PIECE
DIAMETER0.375 INCHES NOMINAL IN
OVERALL WIDTH0.813 INCHES NOMINAL IN
MATERIAL THICKNESS0.250 INCHES NOMINAL IN
SPECIAL FEATURES1 SELF-LOCKING INTEGRAL NUT
TONGUE HOLE TYPEROUND, UNTHREADED
MATERIALSTEEL BAND
LOOP INSIDE DIAMETER2.188 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
N3396Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 7342688?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7342688?
7342688 is a CLAMP,LOOP.
What parts can replace 7342688?
There is 1 known substitute for 7342688: N3396. Substitute compatibility should be verified for your specific system.
What is the NSN for 7342688?
7342688 is cataloged in the U.S. Government catalog under NSN 5340-00-734-2688. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7342688