PartsTable
Technical Data Sheet
Download PDF

7341632 — NUT,SELF-LOCKING,CLINCH

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

7341632: NUT,SELF-LOCKING,CLINCH.

The NUT,SELF-LOCKING,CLINCH is a the manufacturer industrial component. Key specifications include material: STEEL, first_leg_angle: 90.0 DEGREES NOMINAL, first_leg_style: CUT OUT, first_leg_width: 5.690 INCHES MINIMUM AND 5.810 INCHES MAXIMUM IN, first_leg_length: 2.190 INCHES MINIMUM AND 2.310 INCHES MAXIMUM IN, second_leg_angle: 90.0 DEGREES NOMINAL. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-782-1812, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7341632
NSN: 5340-00-782-1812
NIINs: 007821812, 010918582, 011999691
FSC: 5340 — Hardware, Commercial
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
materialSTEEL
first_leg_angle90.0 DEGREES NOMINAL
first_leg_styleCUT OUT
first_leg_width5.690 INCHES MINIMUM AND 5.810 INCHES MAXIMUM IN
first_leg_length2.190 INCHES MINIMUM AND 2.310 INCHES MAXIMUM IN
second_leg_angle90.0 DEGREES NOMINAL
second_leg_styleCUT OUT
second_leg_width5.690 INCHES MINIMUM AND 5.810 INCHES MAXIMUM IN
style_designatorADJACENT ANGLES
second_leg_length2.190 INCHES MINIMUM AND 2.310 INCHES MAXIMUM IN
first_leg_thickness0.104 INCHES MINIMUM AND 0.164 INCHES MAXIMUM IN
center_section_width5.690 INCHES MINIMUM AND 5.810 INCHES MAXIMUM IN
NSN5340-00-782-1812
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 7341632 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
TECHNICAL CHARACTERISTICS
SPECIAL FEATURESMATERIAL IS ALUMINUM,5083,TEMPER H112,SPEC MIL-A-19005.ADDITIONAL INFORMATION MAYBE OBTAINED FROM DRWG. 10932621,FSCM 19207
SUBSTITUTES & CROSS-REFERENCES 2
2590007821812Reference document
Same NSN cross-reference
Reference document — Secondary reference
TDPL10932621Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 7341632?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7341632?
7341632 is a NUT,SELF-LOCKING,CLINCH.
What parts can replace 7341632?
There are 2 known substitutes for 7341632: 2590007821812, TDPL10932621. Substitute compatibility should be verified for your specific system.
What is the NSN for 7341632?
7341632 is cataloged in the U.S. Government catalog under NSN 5340-00-782-1812. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7341632