PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 733955PC7
733955PC7 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The WASHER,FLAT is a the manufacturer industrial component. Key specifications include thickness: 0.028 INCHES MINIMUM AND 0.034 INCHES MAXIMUM IN, hole_diameter: 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN, overall_diameter: 0.865 INCHES MINIMUM AND 0.885 INCHES MAXIMUM IN, surface_treatment: CADMIUM OVERALL, peripheral_shape_style: ROUND, center_hole_shape_style: ROUND. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-209-1962, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
733955PC7
NSN: 5310-00-209-1962
FSC: 5310
CAGE: 10001 — NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER (USA)
SPECIFICATIONS
thickness0.028 INCHES MINIMUM AND 0.034 INCHES MAXIMUM IN
hole_diameter0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN
overall_diameter0.865 INCHES MINIMUM AND 0.885 INCHES MAXIMUM IN
surface_treatmentCADMIUM OVERALL
peripheral_shape_styleROUND
center_hole_shape_styleROUND
cross-sectional_shape_styleRECTANGULAR
material_document_and_classificationASTM A109 ASSN STD ALL MATERIAL RESPONSES OVERALL
surface_treatment_document_and_classificationQQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN5310-00-209-1962
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 733955PC7 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OVERALL DIAMETER: 0.865 INCHES MINIMUM AND 0.885 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A109 ASSN STD ALL MATERIAL RESPONSES OVERALL
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
MATERIAL: STEEL COMP 1008 OR STEEL COMP 1009 OR STEEL COMP 1010 OR STEEL COMP 1011 OR STEEL COMP 1012 OR STEEL COMP 1013 OR STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1017 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020 OVERALL
•
SURFACE TREATMENT: CADMIUM OVERALL
•
CENTER HOLE SHAPE STYLE: ROUND
•
CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR
•
THICKNESS: 0.028 INCHES MINIMUM AND 0.034 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL DIAMETER0.865 INCHES MINIMUM AND 0.885 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONASTM A109 ASSN STD ALL MATERIAL RESPONSES OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
MATERIALSTEEL COMP 1008 OR STEEL COMP 1009 OR STEEL COMP 1010 OR STEEL COMP 1011 OR STEEL COMP 1012 OR STEEL COMP 1013 OR STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1017 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020 OVERALL
SURFACE TREATMENTCADMIUM OVERALL
CENTER HOLE SHAPE STYLEROUND
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
THICKNESS0.028 INCHES MINIMUM AND 0.034 INCHES MAXIMUM IN
PERIPHERAL SHAPE STYLEROUND
HOLE DIAMETER0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
904291Interchangeable
interchangeable cross-reference
interchangeable
FF-W-92Interchangeable
interchangeable cross-reference
interchangeable
EE42417Interchangeable
interchangeable cross-reference
interchangeable
82-1013Interchangeable
interchangeable cross-reference
interchangeable
MS27183-13Interchangeable
interchangeable cross-reference
interchangeable
70004-222Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 733955PC7?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 733955PC7?
733955PC7 is a WASHER,FLAT.
What parts can replace 733955PC7?
There are 9 known substitutes for 733955PC7: 904291, FF-W-92, EE42417 and 6 more. Substitute compatibility should be verified for your specific system.
Is 733955PC7 still available?
733955PC7 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 733955PC7

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026