PartsTable
Technical Data Sheet
Download PDF

73390 — PLUG,TUBE REPAIR

✓ Government record, cited
Lindy · ORING SEAL
PRODUCT OVERVIEW

73390: PLUG,TUBE REPAIR.

The PLUG,TUBE REPAIR is a Lindy industrial component. Key specifications include material: NICKEL ALLOY, major_diameter: 0.625 INCHES NOMINAL IN, minor_diameter: 0.487 INCHES NOMINAL IN, nominal_overall_length: 8.312 INCHES IN, nominal_outside_diameter_tube_accommodated: 0.625 INCHES IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-139-7314, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
73390
NSN: 5340-00-139-7314
NIINs: 001397314, 010452639
FSC: 5340 — Hardware, Commercial
CAGE: 24930 — L3HARRIS TECHNOLOGIES, INC DIV SPACE & AIRBORNE SYSTEMS (USA)
SPECIFICATIONS
materialNICKEL ALLOY
major_diameter0.625 INCHES NOMINAL IN
minor_diameter0.487 INCHES NOMINAL IN
nominal_overall_length8.312 INCHES IN
nominal_outside_diameter_tube_accommodated0.625 INCHES IN
NSN5340-00-139-7314
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 73390 MFR: Lindy ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SHANK DIAMETER: 0.750 INCHES NOMINAL IN
•
FORK SPAN WIDTH: 0.395 INCHES NOMINAL IN
•
SECURING PIN HOLE DIAMETER: 0.125 INCHES NOMINAL IN
•
FORK ARM THICKNESS: 0.202 INCHES NOMINAL IN
•
OVERALL DIAMETER: 1.500 INCHES NOMINAL IN
•
END RADIUS: 0.438 INCHES NOMINAL IN
•
THREAD LENGTH: 1.938 INCHES NOMINAL ROD CONNECTION IN
•
SHANK LENGTH: 2.125 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
SHANK DIAMETER0.750 INCHES NOMINAL IN
FORK SPAN WIDTH0.395 INCHES NOMINAL IN
SECURING PIN HOLE DIAMETER0.125 INCHES NOMINAL IN
FORK ARM THICKNESS0.202 INCHES NOMINAL IN
OVERALL DIAMETER1.500 INCHES NOMINAL IN
END RADIUS0.438 INCHES NOMINAL IN
THREAD LENGTH1.938 INCHES NOMINAL ROD CONNECTION IN
SHANK LENGTH2.125 INCHES NOMINAL IN
STYLE DESIGNATORCLEVIS
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-766,COND A FED SPEC SINGLE MATERIAL RESPONSE OVERALL
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 73390?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 73390?
73390 is a PLUG,TUBE REPAIR manufactured by Lindy.
What is the NSN for 73390?
73390 is cataloged in the U.S. Government catalog under NSN 5340-00-139-7314. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 73390