PartsTable
Technical Data Sheet
Download PDF

7331FS-972-P3 — PACKING WITH RETAINER

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

7331FS-972-P3: PACKING WITH RETAINER.

The PACKING WITH RETAINER is a the manufacturer industrial component. Key specifications include construction: TWO-PIECE, outside_diameter: 2.643 INCHES NOMINAL IN, special_features: ACTION ID 45421847, retainer_thickness: 0.068 INCHES NOMINAL IN, packing_inside_diameter: 2.220 INCHES NOMINAL IN, retainer_inside_diameter: 2.248 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-055-1953, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7331FS-972-P3
NSN: 5330-01-055-1953
FSC: 5330 — Packing and Gasket Materials
CAGE: 72902 — PALMETTO INC (USA)
SPECIFICATIONS
constructionTWO-PIECE
outside_diameter2.643 INCHES NOMINAL IN
special_featuresACTION ID 45421847
retainer_thickness0.068 INCHES NOMINAL IN
packing_inside_diameter2.220 INCHES NOMINAL IN
retainer_inside_diameter2.248 INCHES NOMINAL IN
packing_ring_cross-sectional_diameter2.498 INCHES NOMINAL IN
NSN5330-01-055-1953
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 7331FS-972-P3 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RETAINER INSIDE DIAMETER: 2.248 INCHES NOMINAL IN
•
PACKING INSIDE DIAMETER: 2.220 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 2.643 INCHES NOMINAL IN
•
PACKING RING CROSS-SECTIONAL DIAMETER: 2.498 INCHES NOMINAL IN
•
RETAINER THICKNESS: 0.068 INCHES NOMINAL IN
•
CONSTRUCTION: TWO-PIECE
TECHNICAL CHARACTERISTICS
RETAINER INSIDE DIAMETER2.248 INCHES NOMINAL IN
PACKING INSIDE DIAMETER2.220 INCHES NOMINAL IN
OUTSIDE DIAMETER2.643 INCHES NOMINAL IN
PACKING RING CROSS-SECTIONAL DIAMETER2.498 INCHES NOMINAL IN
RETAINER THICKNESS0.068 INCHES NOMINAL IN
SPECIAL FEATURESACTION ID 45421847
CONSTRUCTIONTWO-PIECE
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 7331FS-972-P3?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7331FS-972-P3?
7331FS-972-P3 is a PACKING WITH RETAINER.
What is the NSN for 7331FS-972-P3?
7331FS-972-P3 is cataloged in the U.S. Government catalog under NSN 5330-01-055-1953. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7331FS-972-P3