PartsTable
Technical Data Sheet
Download PDF

732903PC2 — CLEVIS,ROD END

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

732903PC2: CLEVIS,ROD END.

The CLEVIS,ROD END is a the manufacturer industrial component. Key specifications include material: STEEL COMP 1045 OR STEEL COMP 1040 OR STEEL COMP 1042 OR STEEL COMP 1043 OVERALL, end_radius: 0.437 INCHES NOMINAL IN, fork_depth: 0.625 INCHES NOMINAL IN, shank_length: 2.500 INCHES NOMINAL IN, thread_class: 3A ROD CONNECTION A, hole_diameter: 0.437 INCHES MINIMUM AND 0.438 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-264-7213, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
732903PC2
NSN: 5340-00-264-7213
FSC: 5340 — Hardware, Commercial
CAGE: 10001 — NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER (USA)
SPECIFICATIONS
materialSTEEL COMP 1045 OR STEEL COMP 1040 OR STEEL COMP 1042 OR STEEL COMP 1043 OVERALL
end_radius0.437 INCHES NOMINAL IN
fork_depth0.625 INCHES NOMINAL IN
shank_length2.500 INCHES NOMINAL IN
thread_class3A ROD CONNECTION A
hole_diameter0.437 INCHES MINIMUM AND 0.438 INCHES MAXIMUM IN
overall_width1.240 INCHES MINIMUM AND 1.250 INCHES MAXIMUM IN
thread_length2.313 INCHES NOMINAL ROD CONNECTION IN
overall_height0.865 INCHES MINIMUM AND 0.885 INCHES MAXIMUM IN
shank_diameter0.562 INCHES NOMINAL IN
fork_span_width0.495 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
special_featuresSHANK END OF BODY CHAMFERED ON TWO EDGES 0.187 IN. BY 45.0 DEG ON SAME SURFACE AS PIVOT PIN HOLES IN
NSN5340-00-264-7213
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 732903PC2 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SHANK DIAMETER: 0.562 INCHES NOMINAL IN
•
FORK SPAN WIDTH: 0.495 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
•
FORK ARM THICKNESS: 0.375 INCHES NOMINAL IN
•
END RADIUS: 0.437 INCHES NOMINAL IN
•
THREAD LENGTH: 2.313 INCHES NOMINAL ROD CONNECTION IN
•
SHANK LENGTH: 2.500 INCHES NOMINAL IN
•
STYLE DESIGNATOR: CLEVIS
TECHNICAL CHARACTERISTICS
SHANK DIAMETER0.562 INCHES NOMINAL IN
OVERALL HEIGHT0.865 INCHES MINIMUM AND 0.885 INCHES MAXIMUM IN
FORK SPAN WIDTH0.495 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
FORK ARM THICKNESS0.375 INCHES NOMINAL IN
END RADIUS0.437 INCHES NOMINAL IN
THREAD LENGTH2.313 INCHES NOMINAL ROD CONNECTION IN
SHANK LENGTH2.500 INCHES NOMINAL IN
STYLE DESIGNATORCLEVIS
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-634 FED SPEC ALL MATERIAL RESPONSES OR QQ-S-631 FED SPEC ALL MATERIAL RESPONSES OVERALL
OVERALL WIDTH1.240 INCHES MINIMUM AND 1.250 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 732903PC2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 732903PC2?
732903PC2 is a CLEVIS,ROD END.
What is the NSN for 732903PC2?
732903PC2 is cataloged in the U.S. Government catalog under NSN 5340-00-264-7213. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 732903PC2

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.