PartsTable
Technical Data Sheet
Download PDF

7326655-1 — LOCKING PLATE,NUT AND BOLT

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

7326655-1: LOCKING PLATE,NUT AND BOLT.

The LOCKING PLATE,NUT AND BOLT is a the manufacturer industrial component. Key specifications include width: 1.500 INCHES NOMINAL IN, material: ALUMINUM ALLOY 6061, inside_height: 2.310 INCHES NOMINAL IN, inside_radius: 2.310 INCHES NOMINAL IN, plate_thickness: 0.380 INCHES NOMINAL IN, special_features: ENDS ARE SQUARED INSTEAD OF RADIAL. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-519-0137, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7326655-1
NSN: 5340-01-519-0137
FSC: 5340 — Hardware, Commercial
CAGE: 53711 — NAVAL SEA SYSTEMS COMMAND (USA)
SPECIFICATIONS
width1.500 INCHES NOMINAL IN
materialALUMINUM ALLOY 6061
inside_height2.310 INCHES NOMINAL IN
inside_radius2.310 INCHES NOMINAL IN
plate_thickness0.380 INCHES NOMINAL IN
special_featuresENDS ARE SQUARED INSTEAD OF RADIAL
style_designatorSTRAIGHT
surface_treatmentANODIZE
mounting_hole_diameter0.279 INCHES MINIMUM AND 0.286 INCHES MAXIMUM IN
mounting_hole_quantity2
cross-sectional_shape_styleHALF ROUND
distance_between_mounting_hole_centers7.640 INCHES NOMINAL IN
NSN5340-01-519-0137
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 7326655-1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING HOLE QUANTITY: 2
•
PLATE THICKNESS: 0.380 INCHES NOMINAL IN
•
DISTANCE BETWEEN MOUNTING HOLE CENTERS: 7.640 INCHES NOMINAL IN
•
STYLE DESIGNATOR: STRAIGHT
•
MOUNTING HOLE DIAMETER: 0.279 INCHES MINIMUM AND 0.286 INCHES MAXIMUM IN
•
CROSS-SECTIONAL SHAPE STYLE: HALF ROUND
•
SURFACE TREATMENT: ANODIZE
TECHNICAL CHARACTERISTICS
MOUNTING HOLE QUANTITY2
PLATE THICKNESS0.380 INCHES NOMINAL IN
DISTANCE BETWEEN MOUNTING HOLE CENTERS7.640 INCHES NOMINAL IN
STYLE DESIGNATORSTRAIGHT
MOUNTING HOLE DIAMETER0.279 INCHES MINIMUM AND 0.286 INCHES MAXIMUM IN
CROSS-SECTIONAL SHAPE STYLEHALF ROUND
SPECIAL FEATURESENDS ARE SQUARED INSTEAD OF RADIAL
SURFACE TREATMENTANODIZE
WIDTH1.500 INCHES NOMINAL IN
MATERIALALUMINUM ALLOY 6061
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
7326655Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 7326655-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7326655-1?
7326655-1 is a LOCKING PLATE,NUT AND BOLT.
What parts can replace 7326655-1?
There is 1 known substitute for 7326655-1: 7326655. Substitute compatibility should be verified for your specific system.
What is the NSN for 7326655-1?
7326655-1 is cataloged in the U.S. Government catalog under NSN 5340-01-519-0137. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7326655-1

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.