PartsTable
Technical Data Sheet
Download PDF

7326337-4 — PLATE,MOUNTING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

7326337-4: PLATE,MOUNTING.

The PLATE,MOUNTING is a the manufacturer industrial component. Key specifications include shape: RECTANGULAR, width: 1.000 INCHES NOMINAL1.000 INCHES NOMINAL IN, length: 4.350 INCHES NOMINAL4.350 INCHES NOMINAL IN, material: ALUMINUM ALLOY, thickness: 0.312 INCHES NOMINAL0.312 INCHES NOMINAL IN, special_features: MOUNTING HOLES ARE SPACED 3.750 IN APART ALONG LENGTH IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-505-0890, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7326337-4
NSN: 5340-01-505-0890
FSC: 5340 — Hardware, Commercial
CAGE: 53711 — NAVAL SEA SYSTEMS COMMAND (USA)
SPECIFICATIONS
shapeRECTANGULAR
width1.000 INCHES NOMINAL1.000 INCHES NOMINAL IN
length4.350 INCHES NOMINAL4.350 INCHES NOMINAL IN
materialALUMINUM ALLOY
thickness0.312 INCHES NOMINAL0.312 INCHES NOMINAL IN
special_featuresMOUNTING HOLES ARE SPACED 3.750 IN APART ALONG LENGTH IN
mounting_hole_typeUNTHREADED
mounting_hole_diameter0.194 INCHES MINIMUM AND 0.200 INCHES MAXIMUM ALL HOLES IN
mounting_hole_quantity2
end_item_identificationICAD AY UNIT
material_document_and_classificationASTM-B209 ASSN STD SINGLE MATERIAL RESPONSE
NSN5340-01-505-0890
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 7326337-4 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING HOLE QUANTITY: 2
•
LENGTH: 4.350 INCHES NOMINAL4.350 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM-B209 ASSN STD SINGLE MATERIAL RESPONSE
•
MOUNTING HOLE DIAMETER: 0.194 INCHES MINIMUM AND 0.200 INCHES MAXIMUM ALL HOLES IN
•
SHAPE: RECTANGULAR
•
WIDTH: 1.000 INCHES NOMINAL1.000 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
MOUNTING HOLE QUANTITY2
LENGTH4.350 INCHES NOMINAL4.350 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONASTM-B209 ASSN STD SINGLE MATERIAL RESPONSE
MOUNTING HOLE DIAMETER0.194 INCHES MINIMUM AND 0.200 INCHES MAXIMUM ALL HOLES IN
SHAPERECTANGULAR
SPECIAL FEATURESMOUNTING HOLES ARE SPACED 3.750 IN APART ALONG LENGTH IN
WIDTH1.000 INCHES NOMINAL1.000 INCHES NOMINAL IN
END ITEM IDENTIFICATIONICAD AY UNIT
MATERIALALUMINUM ALLOY
THICKNESS0.312 INCHES NOMINAL0.312 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 3
7326337Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
5793560Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
5793560 FIND 98Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 7326337-4?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7326337-4?
7326337-4 is a PLATE,MOUNTING.
What parts can replace 7326337-4?
There are 3 known substitutes for 7326337-4: 7326337, 5793560, 5793560 FIND 98. Substitute compatibility should be verified for your specific system.
What is the NSN for 7326337-4?
7326337-4 is cataloged in the U.S. Government catalog under NSN 5340-01-505-0890. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7326337-4

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.