7326337-02 — BRACKET,DOUBLE ANGLE

✓ Government record, cited

— · ORING SEAL

PRODUCT OVERVIEW

7326337-02: BRACKET,DOUBLE ANGLE.

The BRACKET,DOUBLE ANGLE is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 5052, first_leg_angle: 90.0 DEGREES NOMINAL, first_leg_style: CORNER RADIUS, first_leg_width: 5.380 INCHES NOMINAL IN, furnished_items: 2 CAPTIVE SCREWS, LOW PROFILE, first_leg_length: 2.050 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-509-7625, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

7326337-02

NSN: 5340-01-509-7625
FSC: 5340 — Hardware, Commercial
CAGE: 53711 — NAVAL SEA SYSTEMS COMMAND (USA)

SPECIFICATIONS

material	ALUMINUM ALLOY 5052
first_leg_angle	90.0 DEGREES NOMINAL
first_leg_style	CORNER RADIUS
first_leg_width	5.380 INCHES NOMINAL IN
furnished_items	2 CAPTIVE SCREWS, LOW PROFILE
first_leg_length	2.050 INCHES NOMINAL IN
second_leg_angle	90.0 DEGREES NOMINAL
second_leg_style	SQUARE
second_leg_width	5.380 INCHES NOMINAL IN
style_designator	ADJACENT ANGLES
second_leg_length	2.050 INCHES NOMINAL IN
surface_treatment	CHROMATE
NSN	5340-01-509-7625

COMPONENT DIAGRAM

KEY FEATURES

•

SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.155 INCHES NOMINAL IN

•

FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.155 INCHES NOMINAL IN

•

FIRST LEG HOLE DIAMETER: 0.154 INCHES MINIMUM AND 0.157 INCHES MAXIMUM IN

•

FIRST LEG ANGLE: 90.0 DEGREES NOMINAL

•

CENTER SECTION THICKNESS: 0.125 INCHES NOMINAL IN

•

FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH: 2.950 INCHES NOMINAL IN

•

SECOND LEG RELATIONSHIP TO FIRST LEG: NOT IDENTICAL

•

SECOND LEG ANGLE: 90.0 DEGREES NOMINAL

TECHNICAL CHARACTERISTICS

SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH	0.155 INCHES NOMINAL IN
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH	0.155 INCHES NOMINAL IN
FIRST LEG HOLE DIAMETER	0.154 INCHES MINIMUM AND 0.157 INCHES MAXIMUM IN
FIRST LEG ANGLE	90.0 DEGREES NOMINAL
CENTER SECTION THICKNESS	0.125 INCHES NOMINAL IN
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH	2.950 INCHES NOMINAL IN
SECOND LEG RELATIONSHIP TO FIRST LEG	NOT IDENTICAL
SECOND LEG ANGLE	90.0 DEGREES NOMINAL
SECOND LEG HOLE DIAMETER	0.154 INCHES MINIMUM AND 0.159 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	MIL-C-5541, CLASS 1A MIL SPEC SINGLE TREATMENT RESPONSE A

SUBSTITUTES & CROSS-REFERENCES 1

7326337Reference document

Same NSN cross-reference

Reference document — Drawing number reference only

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Semi-active item — no replacement plannedNo demilitarization required

Ready to buy 7326337-02?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 7326337-02?

7326337-02 is a BRACKET,DOUBLE ANGLE.

What parts can replace 7326337-02?

There is 1 known substitute for 7326337-02: 7326337. Substitute compatibility should be verified for your specific system.

What is the NSN for 7326337-02?

7326337-02 is cataloged in the U.S. Government catalog under NSN 5340-01-509-7625. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

7326337-02 — BRACKET,DOUBLE ANGLE

Request a Quote — 7326337-02