PartsTable
Technical Data Sheet
Download PDF

7326298-1 — PLATE,T

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

7326298-1: PLATE,T.

The PLATE,T is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 6061, overall_width: 4.250 INCHES NOMINAL IN, overall_length: 5.420 INCHES NOMINAL IN, special_features: HAS ADDITIONAL MOUNTING HOLES WITH 0.281 INCH DIAMETERS IN, style_designator: TEE, top_section_width: 1.250 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-509-4740, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7326298-1
NSN: 5340-01-509-4740
FSC: 5340 — Hardware, Commercial
CAGE: 53711 — NAVAL SEA SYSTEMS COMMAND (USA)
SPECIFICATIONS
materialALUMINUM ALLOY 6061
overall_width4.250 INCHES NOMINAL IN
overall_length5.420 INCHES NOMINAL IN
special_featuresHAS ADDITIONAL MOUNTING HOLES WITH 0.281 INCH DIAMETERS IN
style_designatorTEE
top_section_width1.250 INCHES NOMINAL IN
material_thickness0.250 INCHES NOMINAL IN
mounting_hole_typePLAIN
center_section_width2.000 INCHES NOMINAL IN
mounting_hole_diameter0.221 INCHES NOMINAL IN
material_document_and_classificationASTM-B209, TEMPER T651 ASSN STD SINGLE MATERIAL RESPONSE
NSN5340-01-509-4740
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 7326298-1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TOP SECTION WIDTH: 1.250 INCHES NOMINAL IN
•
CENTER SECTION WIDTH: 2.000 INCHES NOMINAL IN
•
STYLE DESIGNATOR: TEE
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM-B209, TEMPER T651 ASSN STD SINGLE MATERIAL RESPONSE
•
MOUNTING HOLE DIAMETER: 0.221 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.250 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
TOP SECTION WIDTH1.250 INCHES NOMINAL IN
CENTER SECTION WIDTH2.000 INCHES NOMINAL IN
STYLE DESIGNATORTEE
MATERIAL DOCUMENT AND CLASSIFICATIONASTM-B209, TEMPER T651 ASSN STD SINGLE MATERIAL RESPONSE
MOUNTING HOLE DIAMETER0.221 INCHES NOMINAL IN
OVERALL LENGTH5.420 INCHES NOMINAL IN
OVERALL WIDTH4.250 INCHES NOMINAL IN
MATERIAL THICKNESS0.250 INCHES NOMINAL IN
SPECIAL FEATURESHAS ADDITIONAL MOUNTING HOLES WITH 0.281 INCH DIAMETERS IN
MATERIALALUMINUM ALLOY 6061
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 7326298-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7326298-1?
7326298-1 is a PLATE,T.
What is the NSN for 7326298-1?
7326298-1 is cataloged in the U.S. Government catalog under NSN 5340-01-509-4740. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7326298-1

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.