PartsTable
Technical Data Sheet
Download PDF

7326240 FIND 2 — BRACKET,ANGLE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

7326240 FIND 2: BRACKET,ANGLE.

The BRACKET,ANGLE is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 6063, first_leg_angle: 90.0 DEGREES NOMINAL, first_leg_style: CHAMFERED ENDS, first_leg_width: 7.980 INCHES MINIMUM AND 8.020 INCHES MAXIMUM IN, first_leg_length: 0.980 INCHES MINIMUM AND 1.020 INCHES MAXIMUM IN, second_leg_style: CHAMFERED ENDS. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-516-3318, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7326240 FIND 2
NSN: 5340-01-516-3318
FSC: 5340 — Hardware, Commercial
CAGE: 53711 — NAVAL SEA SYSTEMS COMMAND (USA)
SPECIFICATIONS
materialALUMINUM ALLOY 6063
first_leg_angle90.0 DEGREES NOMINAL
first_leg_styleCHAMFERED ENDS
first_leg_width7.980 INCHES MINIMUM AND 8.020 INCHES MAXIMUM IN
first_leg_length0.980 INCHES MINIMUM AND 1.020 INCHES MAXIMUM IN
second_leg_styleCHAMFERED ENDS
second_leg_width7.980 INCHES MINIMUM AND 8.020 INCHES MAXIMUM IN
style_designatorANGLE
second_leg_length1.670 INCHES MINIMUM AND 1.710 INCHES MAXIMUM IN
surface_treatmentPRIMER AND PAINT
mounting_hole_typePLAIN
first_leg_end_width7.740 INCHES MINIMUM AND 7.780 INCHES MAXIMUM IN
NSN5340-01-516-3318
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 7326240 FIND 2 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.436 INCHES NOMINAL IN
•
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.500 INCHES NOMINAL IN
•
FIRST LEG HOLE DIAMETER: 0.185 INCHES NOMINAL IN
•
FIRST LEG ANGLE: 90.0 DEGREES NOMINAL
•
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH: 4.750 INCHES NOMINAL IN
•
SECOND LEG RELATIONSHIP TO FIRST LEG: NOT IDENTICAL
•
SECOND LEG HOLE DIAMETER: 0.281 INCHES NOMINAL IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-P-24441/20 MIL SPEC 1ST TREATMENT RESPONSE AND 639435-15 MFR REF 2ND TREATMENT RESPONSE
TECHNICAL CHARACTERISTICS
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH0.436 INCHES NOMINAL IN
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH0.500 INCHES NOMINAL IN
FIRST LEG HOLE DIAMETER0.185 INCHES NOMINAL IN
FIRST LEG ANGLE90.0 DEGREES NOMINAL
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH4.750 INCHES NOMINAL IN
SECOND LEG RELATIONSHIP TO FIRST LEGNOT IDENTICAL
SECOND LEG HOLE DIAMETER0.281 INCHES NOMINAL IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-P-24441/20 MIL SPEC 1ST TREATMENT RESPONSE AND 639435-15 MFR REF 2ND TREATMENT RESPONSE
SECOND LEG WIDTH7.980 INCHES MINIMUM AND 8.020 INCHES MAXIMUM IN
SECOND LEG LENGTH1.670 INCHES MINIMUM AND 1.710 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 7326240 FIND 2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7326240 FIND 2?
7326240 FIND 2 is a BRACKET,ANGLE.
What is the NSN for 7326240 FIND 2?
7326240 FIND 2 is cataloged in the U.S. Government catalog under NSN 5340-01-516-3318. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7326240 FIND 2

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.