PartsTable / COMPONENT / 732384
732384
✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC SEALING ELEMENT, case_style: RECESSED, seal_width: 0.375 INCHES NOMINAL IN, temp_rating: -65.0 CELSIUS AND 225.0 CELSIUS DEGC, outside_diameter: 3.505 INCHES NOMINAL IN, attachment_method: CEMENTED. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-891-6986, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
732384
NSN: 5330-00-891-6986 FSC: 5330 CAGE: 0B103 — MERITOR SPECIALTY PRODUCTS LLC (USA)
SPECIFICATIONS
material RUBBER SYNTHETIC SEALING ELEMENT case_style RECESSED seal_width 0.375 INCHES NOMINAL IN temp_rating -65.0 CELSIUS AND 225.0 CELSIUS DEGC outside_diameter 3.505 INCHES NOMINAL IN attachment_method CEMENTED surface_treatment PLASTIC CASE housing_bore_diameter 3.500 INCHES NOMINAL IN sealing_element_style VERTICAL accommodated_shaft_diameter 2.750 INCHES NOMINAL IN accommodated_shaft_maximum_rated_speed 3600 FEET PER MINUTE FT NSN 5330-00-891-6986
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: 732384
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• SEALING ELEMENT STYLE: VERTICAL
• TEMP RATING: -65.0 CELSIUS AND 225.0 CELSIUS DEGC
• ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 3600 FEET PER MINUTE FT
• OUTSIDE DIAMETER: 3.505 INCHES NOMINAL IN
• HOUSING BORE DIAMETER: 3.500 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
CASE STYLE RECESSED SEALING ELEMENT STYLE VERTICAL TEMP RATING -65.0 CELSIUS AND 225.0 CELSIUS DEGC ACCOMMODATED SHAFT MAXIMUM RATED SPEED 3600 FEET PER MINUTE FT OUTSIDE DIAMETER 3.505 INCHES NOMINAL IN HOUSING BORE DIAMETER 3.500 INCHES NOMINAL IN MATERIAL STEEL CASE MATERIAL RUBBER SYNTHETIC SEALING ELEMENT SURFACE TREATMENT PLASTIC CASE ATTACHMENT METHOD CEMENTED
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
838206 Interchangeable interchangeable cross-reference
interchangeable
26269 Interchangeable interchangeable cross-reference
interchangeable
404 Interchangeable interchangeable cross-reference
interchangeable
70419 Interchangeable interchangeable cross-reference
interchangeable
70400 Interchangeable interchangeable cross-reference
interchangeable
27269 Interchangeable interchangeable cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy 732384?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 732384?
732384 is a SEAL,PLAIN ENCASED.
What parts can replace 732384?
There are 10 known substitutes for 732384: 838206, 26269, 404 and 7 more. Substitute compatibility should be verified for your specific system.
Is 732384 still available?
732384 is currently cancelled.