PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 7323041
7323041 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include material: ASBESTOS AND RUBBER CHLOROPRENE CLASS CR OVERALL, outside_diameter: 7.250 INCHES NOMINAL IN, aperture_diameter: 5.562 INCHES NOMINAL IN, cross-sectional_thickness: 0.027 INCHES MINIMUM AND 0.035 INCHES MAXIMUM IN, largest_bolt_hole_diameter: 0.438 INCHES NOMINAL IN, cross-sectional_shape_style: SOLID SINGLE OR COMPOSITION. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-732-3041, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7323041
NSN: 5330-00-732-3041
FSC: 5330
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
materialASBESTOS AND RUBBER CHLOROPRENE CLASS CR OVERALL
outside_diameter7.250 INCHES NOMINAL IN
aperture_diameter5.562 INCHES NOMINAL IN
cross-sectional_thickness0.027 INCHES MINIMUM AND 0.035 INCHES MAXIMUM IN
largest_bolt_hole_diameter0.438 INCHES NOMINAL IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
smallest_bolt_hole_diameter0.312 INCHES NOMINAL IN
material_document_and_classificationMIL-G-12803,+1151-A MIL SPEC ALL MATERIAL RESPONSES OVERALL
NSN5330-00-732-3041
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 7323041 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SMALLEST BOLT HOLE DIAMETER: 0.312 INCHES NOMINAL IN
•
CROSS-SECTIONAL THICKNESS: 0.027 INCHES MINIMUM AND 0.035 INCHES MAXIMUM IN
•
LARGEST BOLT HOLE DIAMETER: 0.438 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 7.250 INCHES NOMINAL IN
•
MATERIAL: ASBESTOS AND RUBBER CHLOROPRENE CLASS CR OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
APERTURE DIAMETER: 5.562 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-12803,+1151-A MIL SPEC ALL MATERIAL RESPONSES OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
SMALLEST BOLT HOLE DIAMETER0.312 INCHES NOMINAL IN
CROSS-SECTIONAL THICKNESS0.027 INCHES MINIMUM AND 0.035 INCHES MAXIMUM IN
LARGEST BOLT HOLE DIAMETER0.438 INCHES NOMINAL IN
OUTSIDE DIAMETER7.250 INCHES NOMINAL IN
MATERIALASBESTOS AND RUBBER CHLOROPRENE CLASS CR OVERALL
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
APERTURE DIAMETER5.562 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-G-12803,+1151-A MIL SPEC ALL MATERIAL RESPONSES OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
203-123Interchangeable
interchangeable cross-reference
interchangeable
C2-95-253J253JA2B3R100012LInterchangeable
interchangeable cross-reference
interchangeable
35-306Interchangeable
interchangeable cross-reference
interchangeable
PN306Interchangeable
interchangeable cross-reference
interchangeable
US-100462Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 7323041?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7323041?
7323041 is a GASKET.
What parts can replace 7323041?
There are 5 known substitutes for 7323041: 203-123, C2-95-253J253JA2B3R100012L, 35-306 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 7323041?
7323041 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-732-3041. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7323041

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026