PartsTable
Technical Data Sheet
Download PDF

7322WNMBR — BEARING,BALL,ANNULAR

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

7322WNMBR: BEARING,BALL,ANNULAR.

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL BALL, bore_shape: STRAIGHT, bore_diameter: 110.00 MILLIMETERS NOMINAL MM, contact_angle: 25.0 DEGREES MINIMUM, overall_width: 50.0 MILLIMETERS NOMINAL MM, load_direction: ANGULAR. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-156-8270, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7322WNMBR
NSN: 3110-00-156-8270
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 60380 — TIMKEN AEROSPACE, INC DBA TORRINGTON PRODUCT (USA)
SPECIFICATIONS
materialSTEEL BALL
bore_shapeSTRAIGHT
bore_diameter110.00 MILLIMETERS NOMINAL MM
contact_angle25.0 DEGREES MINIMUM
overall_width50.0 MILLIMETERS NOMINAL MM
load_directionANGULAR
surface_finishGROUND
style_designatorCOUNTERBORED OUTER RING, NON-SEPARABLE
overall_outside_diameter240.00 MILLIMETERS NOMINAL MM
standard_tolerance_designationABEC NO.1
NSN3110-00-156-8270
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 7322WNMBR · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: GROUND
•
STYLE DESIGNATOR: COUNTERBORED OUTER RING, NON-SEPARABLE
•
OVERALL OUTSIDE DIAMETER: 240.00 MILLIMETERS NOMINAL MM
•
BORE SHAPE: STRAIGHT
•
CONTACT ANGLE: 25.0 DEGREES MINIMUM
•
LOAD DIRECTION: ANGULAR
•
STANDARD TOLERANCE DESIGNATION: ABEC NO.1
TECHNICAL CHARACTERISTICS
SURFACE FINISHGROUND
STYLE DESIGNATORCOUNTERBORED OUTER RING, NON-SEPARABLE
OVERALL WIDTH50.0 MILLIMETERS NOMINAL MM
OVERALL OUTSIDE DIAMETER240.00 MILLIMETERS NOMINAL MM
BORE SHAPESTRAIGHT
CONTACT ANGLE25.0 DEGREES MINIMUM
LOAD DIRECTIONANGULAR
STANDARD TOLERANCE DESIGNATIONABEC NO.1
BORE DIAMETER110.00 MILLIMETERS NOMINAL MM
MATERIALSTEEL OUTER RING
SUBSTITUTES & CROSS-REFERENCES 3
7322Reference document
Same NSN cross-reference
Reference document — Secondary reference
30322Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
110BB03Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 7322WNMBR?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7322WNMBR?
7322WNMBR is a BEARING,BALL,ANNULAR.
What parts can replace 7322WNMBR?
There are 3 known substitutes for 7322WNMBR: 7322, 30322, 110BB03. Substitute compatibility should be verified for your specific system.
What is the NSN for 7322WNMBR?
7322WNMBR is cataloged in the U.S. Government catalog under NSN 3110-00-156-8270. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7322WNMBR