PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 7319DF
7319DF ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL OUTER RING, bore_diameter: 95.0 MILLIMETERS NOMINAL MM, contact_angle: 29.0 DEGREES NOMINAL, overall_width: 90.0 MILLIMETERS NOMINAL MM, load_direction: ANGULAR, surface_finish: GROUND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-01-050-1573, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7319DF
NSN: 3110-01-050-1573
FSC: 3110
CAGE: 38443 — SKF USA INC. (USA)
SPECIFICATIONS
materialSTEEL OUTER RING
bore_diameter95.0 MILLIMETERS NOMINAL MM
contact_angle29.0 DEGREES NOMINAL
overall_width90.0 MILLIMETERS NOMINAL MM
load_directionANGULAR
surface_finishGROUND
style_designatorCOUNTERBORED OUTER RINGS, NON-SEPARABLE, FACE TO FACE MOUNTING
overall_outside_diameter200.0 MILLIMETERS NOMINAL MM
internal_fit-up_designationSTANDARD
retainer_fabrication_methodMACHINED
standard_tolerance_designationABEC NO.1
NSN3110-01-050-1573
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 7319DF · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LOAD DIRECTION: ANGULAR
•
SURFACE FINISH: GROUND
•
STYLE DESIGNATOR: COUNTERBORED OUTER RINGS, NON-SEPARABLE, FACE TO FACE MOUNTING
•
MATERIAL: LUBRICANT LUBRICATION
•
RETAINER FABRICATION METHOD: MACHINED
•
STANDARD TOLERANCE DESIGNATION: ABEC NO.1
•
CONTACT ANGLE: 29.0 DEGREES NOMINAL
TECHNICAL CHARACTERISTICS (FLIS)
LOAD DIRECTIONANGULAR
SURFACE FINISHGROUND
STYLE DESIGNATORCOUNTERBORED OUTER RINGS, NON-SEPARABLE, FACE TO FACE MOUNTING
MATERIALLUBRICANT LUBRICATION
RETAINER FABRICATION METHODMACHINED
STANDARD TOLERANCE DESIGNATIONABEC NO.1
CONTACT ANGLE29.0 DEGREES NOMINAL
MATERIALSTEEL OUTER RING
OVERALL OUTSIDE DIAMETER200.0 MILLIMETERS NOMINAL MM
MATERIALSTEEL BALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 25
QH20303Interchangeable
interchangeable cross-reference
interchangeable
G14363PC11Interchangeable
interchangeable cross-reference
interchangeable
7319Interchangeable
interchangeable cross-reference
interchangeable
8700-20PC564Interchangeable
interchangeable cross-reference
interchangeable
V30319DTL1Interchangeable
interchangeable cross-reference
interchangeable
AA59626-210TABTUInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 7319DF?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7319DF?
7319DF is a BEARING,BALL,ANNULAR.
What parts can replace 7319DF?
There are 25 known substitutes for 7319DF: QH20303, G14363PC11, 7319 and 22 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 7319DF?
7319DF is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-01-050-1573. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7319DF

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026