PartsTable
Technical Data Sheet
Download PDF

7312139 — NUT,PLAIN,HEXAGON

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

7312139: NUT,PLAIN,HEXAGON.

The NUT,PLAIN,HEXAGON is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, nut_style: HEXAGON, nut_height: 1.000 INCHES NOMINAL IN, thread_class: 2B, thread_series: UNIFIED NATIONAL COARSE (UNC), special_features: HOLE DRILLED 0.500 IN. NOM FROM 2ND END THRU IN.

This part is cataloged in the U.S. Government catalog under NSN 5310-01-485-4003, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7312139
NSN: 5310-01-485-4003
NIINs: 014854003, 014854014, 014854021
FSC: 5310 — Nuts and Washers
CAGE: 53711 — NAVAL SEA SYSTEMS COMMAND (USA)
SPECIFICATIONS
materialSTEEL OVERALL
nut_styleHEXAGON
nut_height1.000 INCHES NOMINAL IN
thread_class2B
thread_seriesUNIFIED NATIONAL COARSE (UNC)
special_featuresHOLE DRILLED 0.500 IN. NOM FROM 2ND END THRU IN
thread_directionRIGHT-HAND
surface_treatmentZINC OVERALL
width_across_flats4.475 INCHES MINIMUM AND 4.625 INCHES MAXIMUM IN
nominal_thread_size1.500 INCHES IN
bearing_surface_typeWASHER FACED
drilled_hole_diameter0.250 INCHES NOMINAL IN
NSN5310-01-485-4003
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 7312139 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 2.300 INCHES MINIMUM AND 2.375 INCHES MAXIMUM IN
•
THREAD SERIES: UNIFIED NATIONAL COARSE (UNC)
•
HOLE CONFIGURATION STYLE: CONFIGURATION A
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 1.500 INCHES IN
•
NUT HEIGHT: 0.844 INCHES NOMINAL IN
•
DRILLED HOLE DIAMETER: 0.250 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS2.300 INCHES MINIMUM AND 2.375 INCHES MAXIMUM IN
THREAD SERIESUNIFIED NATIONAL COARSE (UNC)
HOLE CONFIGURATION STYLECONFIGURATION A
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE1.500 INCHES IN
NUT HEIGHT0.844 INCHES NOMINAL IN
DRILLED HOLE DIAMETER0.250 INCHES NOMINAL IN
SPECIAL FEATURESHOLE DRILLED 0.438 IN. NOM FROM 2ND END THRU IN
SURFACE TREATMENTZINC OVERALL
NUT STYLEHEXAGON
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 7312139?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7312139?
7312139 is a NUT,PLAIN,HEXAGON.
What is the NSN for 7312139?
7312139 is cataloged in the U.S. Government catalog under NSN 5310-01-485-4003. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7312139