PartsTable
Technical Data Sheet
PartsTable / MRO / 731114
731114 ✓ Verified by PartsTable
Gorenje · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The STOP,CAM,HYDRAULIC PUMP is a Gorenje industrial component. Key specifications include material: PLASTIC CASE, body_style: MULTIPOLE-MULTIPLE ACTUATOR TYPE, body_width: 2.265 INCHES NOMINAL IN, body_length: 2.500 INCHES NOMINAL IN, boss_height: 0.140 INCHES NOMINAL IN, reset_method: MANUAL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-210-0751, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 731114
NSN: 5310-00-210-0751
FSC: 5310
CAGE: 10001 — NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER (USA)
SPECIFICATIONS
materialPLASTIC CASE
body_styleMULTIPOLE-MULTIPLE ACTUATOR TYPE
body_width2.265 INCHES NOMINAL IN
body_length2.500 INCHES NOMINAL IN
boss_height0.140 INCHES NOMINAL IN
reset_methodMANUAL
storage_typeGENERAL PURPOSE WAREHOUSE
pole_quantity3
fragility_factorMODERATELY RUGGED
special_featuresUSED IN HYDRAULIC PUMP, MODEL 64WK02005
actuator_functionTRIP-RESET
frequency_in_hertz60.0 ALL LOCATIONS
NSN5310-00-210-0751
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 731114 · Gorenje ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
731114Interchangeable
interchangeable cross-reference
interchangeable
731114PC5Interchangeable
interchangeable cross-reference
interchangeable
71-111-4Interchangeable
interchangeable cross-reference
interchangeable
527573Interchangeable
interchangeable cross-reference
interchangeable
7311Interchangeable
interchangeable cross-reference
interchangeable
DS-939398Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 731114?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 731114?
731114 is a STOP,CAM,HYDRAULIC PUMP manufactured by Gorenje. It is classified as a MRO (MRO_GENERAL).
What parts can replace 731114?
There are 6 known substitutes for 731114: 731114, 731114PC5, 71-111-4 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 731114?
731114 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-210-0751. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 731114

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026