PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 7308T
7308T ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include bore_shape: STRAIGHT, bore_diameter: 40.00 MILLIMETERS NOMINAL MM, contact_angle: 25.0 DEGREES MINIMUM, overall_width: 23.00 MILLIMETERS NOMINAL MM, load_direction: ANGULAR, surface_finish: GROUND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-156-8049, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7308T
NSN: 3110-00-156-8049
FSC: 3110
CAGE: 01212 — FEDERAL-MOGUL CORP GOVERNMENT SALES DEPT (USA)
SPECIFICATIONS
bore_shapeSTRAIGHT
bore_diameter40.00 MILLIMETERS NOMINAL MM
contact_angle25.0 DEGREES MINIMUM
overall_width23.00 MILLIMETERS NOMINAL MM
load_directionANGULAR
surface_finishGROUND
lubrication_materialLUBRICANT
overall_outside_diameter90.00 MILLIMETERS NOMINAL MM
standard_tolerance_designationABEC NO.1
NSN3110-00-156-8049
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 7308T · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CONTACT ANGLE: 25.0 DEGREES MINIMUM
•
BORE SHAPE: STRAIGHT
•
LOAD DIRECTION: ANGULAR
•
SURFACE FINISH: GROUND
•
LUBRICATION MATERIAL: LUBRICANT
•
STANDARD TOLERANCE DESIGNATION: ABEC NO.1
•
BORE DIAMETER: 40.00 MILLIMETERS NOMINAL MM
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL WIDTH23.00 MILLIMETERS NOMINAL MM
CONTACT ANGLE25.0 DEGREES MINIMUM
BORE SHAPESTRAIGHT
LOAD DIRECTIONANGULAR
SURFACE FINISHGROUND
LUBRICATION MATERIALLUBRICANT
STANDARD TOLERANCE DESIGNATIONABEC NO.1
BORE DIAMETER40.00 MILLIMETERS NOMINAL MM
OVERALL OUTSIDE DIAMETER90.00 MILLIMETERS NOMINAL MM
VERIFIED SUBSTITUTES & CROSS-REFERENCES 32
FS-200M-SBInterchangeable
interchangeable cross-reference
interchangeable
22C1239Interchangeable
interchangeable cross-reference
interchangeable
FS-200M-SB-19387Interchangeable
interchangeable cross-reference
interchangeable
18-1-115Interchangeable
interchangeable cross-reference
interchangeable
SMB528545-2Interchangeable
interchangeable cross-reference
interchangeable
SCB22160-1Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 7308T?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7308T?
7308T is a BEARING,BALL,ANNULAR.
What parts can replace 7308T?
There are 32 known substitutes for 7308T: FS-200M-SB, 22C1239, FS-200M-SB-19387 and 29 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 7308T?
7308T is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-156-8049. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7308T

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026