PartsTable
Technical Data Sheet
73080 ✓ Verified by PartsTable
Lindy · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

This 8 way extension strip is ideal for replacing existing trailing power strips to create neater, safer computer, AV and IT installations. Its vertical design features 8 sockets which allow a multitude of devices to be connected without the mess and hazard of using multiple power strips and the inevitable tangle of cables. Furthermore, protection for your sensitive computer equipment is provided by a built-in surge protector.<br><br>It also features two handy USB ports which output 2.1A on each port for connecting USB devices.

Port 1 is specially optimised for use with Apple products. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-156-8049, indicating validated use in U.S. government and defense logistics supply chains.

WHERE IT FITS
73080
NSN: 3110-00-156-8049
FSC: 3110
CAGE: 80038 — EQUITABLE BEARING CO INC (USA)
SPECIFICATIONS
current_typeDC
mounting_typeBRACKET
overall_width3.250 INCHES NOMINAL IN
overall_height4.000 INCHES NOMINAL IN
overall_length5.750 INCHES NOMINAL IN
special_featuresSOLID STATE; LOW FREQUENCY TONE; VOLTAGE SPIKE AND SURGE PROTECTED; SOUND AT 60 PULSES PER MINUTE
voltage_in_volts24.0
operating_temp_range-40.0 TO 185.0 FAHRENHEIT DEGF
environmental_protectionDUSTPROOF
loudness_level_in_decibels112 DB DB
NSN3110-00-156-8049
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 73080 · Lindy ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
CONTACT ANGLE: 25.0 DEGREES MINIMUM
BORE SHAPE: STRAIGHT
LOAD DIRECTION: ANGULAR
SURFACE FINISH: GROUND
LUBRICATION MATERIAL: LUBRICANT
STANDARD TOLERANCE DESIGNATION: ABEC NO.1
BORE DIAMETER: 40.00 MILLIMETERS NOMINAL MM
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL WIDTH23.00 MILLIMETERS NOMINAL MM
CONTACT ANGLE25.0 DEGREES MINIMUM
BORE SHAPESTRAIGHT
LOAD DIRECTIONANGULAR
SURFACE FINISHGROUND
LUBRICATION MATERIALLUBRICANT
STANDARD TOLERANCE DESIGNATIONABEC NO.1
BORE DIAMETER40.00 MILLIMETERS NOMINAL MM
OVERALL OUTSIDE DIAMETER90.00 MILLIMETERS NOMINAL MM
VERIFIED SUBSTITUTES & CROSS-REFERENCES 32
FS-200M-SBInterchangeable
interchangeable cross-reference
interchangeable
22C1239Interchangeable
interchangeable cross-reference
interchangeable
FS-200M-SB-19387Interchangeable
interchangeable cross-reference
interchangeable
18-1-115Interchangeable
interchangeable cross-reference
interchangeable
SMB528545-2Interchangeable
interchangeable cross-reference
interchangeable
SCB22160-1Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 73080?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 73080?
73080 is a BEARING,BALL,ANNULAR manufactured by Lindy.
What parts can replace 73080?
There are 32 known substitutes for 73080: FS-200M-SB, 22C1239, FS-200M-SB-19387 and 29 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 73080?
73080 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-156-8049. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 73080