PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 7307BEGBP
7307BEGBP ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL BALL, bore_diameter: 35.0 MILLIMETERS NOMINAL MM, overall_width: 21.0 MILLIMETERS NOMINAL MM, load_direction: ANGULAR, surface_finish: GROUND, special_features: PAIR OF BEARINGS. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-864-0575, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7307BEGBP
NSN: 3110-00-864-0575
FSC: 3110
CAGE: 52676 — SKF USA INC. (USA)
SPECIFICATIONS
materialSTEEL BALL
bore_diameter35.0 MILLIMETERS NOMINAL MM
overall_width21.0 MILLIMETERS NOMINAL MM
load_directionANGULAR
surface_finishGROUND
special_featuresPAIR OF BEARINGS
style_designatorUNIVERSAL GROUND FACES, COUNTERBORED OUTER RING, NON-SEPARABLE
overall_outside_diameter80.0 MILLIMETERS NOMINAL MM
bearing_preload_designationLIGHT
retainer_fabrication_methodMACHINED
standard_tolerance_designationABEC NO.3
NSN3110-00-864-0575
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 7307BEGBP · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LOAD DIRECTION: ANGULAR
•
BEARING PRELOAD DESIGNATION: LIGHT
•
BORE DIAMETER: 35.0 MILLIMETERS NOMINAL MM
•
STANDARD TOLERANCE DESIGNATION: ABEC NO.3
•
SURFACE FINISH: GROUND
•
MATERIAL: STEEL INNER RING
TECHNICAL CHARACTERISTICS (FLIS)
LOAD DIRECTIONANGULAR
BEARING PRELOAD DESIGNATIONLIGHT
BORE DIAMETER35.0 MILLIMETERS NOMINAL MM
STANDARD TOLERANCE DESIGNATIONABEC NO.3
OVERALL WIDTH21.0 MILLIMETERS NOMINAL MM
SURFACE FINISHGROUND
SPECIAL FEATURESPAIR OF BEARINGS
MATERIALSTEEL INNER RING
MATERIALSTEEL OUTER RING
OVERALL OUTSIDE DIAMETER80.0 MILLIMETERS NOMINAL MM
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
AL68Interchangeable
interchangeable cross-reference
interchangeable
AU19Interchangeable
interchangeable cross-reference
interchangeable
GPW12164Interchangeable
interchangeable cross-reference
interchangeable
FFB171Interchangeable
Same NIIN cross-reference
interchangeable
998F1419-174Interchangeable
Same NIIN cross-reference
interchangeable
Q30307DTL3AInterchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 7307BEGBP?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7307BEGBP?
7307BEGBP is a BEARING,BALL,ANNULAR.
What parts can replace 7307BEGBP?
There are 6 known substitutes for 7307BEGBP: AL68, AU19, GPW12164 and 3 more. Substitute compatibility should be verified for your specific system.
Is 7307BEGBP still available?
7307BEGBP is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7307BEGBP

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026