PartsTable
Technical Data Sheet
Download PDF

7304BEGAMVU099 — BEARING,BALL,DUPLEX

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

7304BEGAMVU099: BEARING,BALL,DUPLEX.

The BEARING,BALL,DUPLEX is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, bore_diameter: 20.0 MILLIMETERS NOMINAL MM, contact_angle: 37.0 DEGREES NOMINAL, overall_width: 30.0 MILLIMETERS NOMINAL MM, load_direction: ANGULAR, surface_finish: GROUND. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-101-4641, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7304BEGAMVU099
NSN: 3110-00-101-4641
NIINs: 001014641, 012223330
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 52676 — SKF USA INC. (USA)
SPECIFICATIONS
materialSTEEL OVERALL
bore_diameter20.0 MILLIMETERS NOMINAL MM
contact_angle37.0 DEGREES NOMINAL
overall_width30.0 MILLIMETERS NOMINAL MM
load_directionANGULAR
surface_finishGROUND
style_designatorUNIVERSAL GROUND FACES, SHOULDERED INNER RING, SEPARABLE
overall_outside_diameter52.0 MILLIMETERS NOMINAL MM
internal_fit-up_designationSTANDARD
standard_tolerance_designationABEC NO.1
NSN3110-00-101-4641
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 7304BEGAMVU099 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: GROUND
•
BEARING PRELOAD DESIGNATION: LIGHT
•
STYLE DESIGNATOR: UNIVERSAL GROUND FACES, COUNTERBORED OUTER RING, NON-SEPARABLE
•
OVERALL OUTSIDE DIAMETER: 52.00 MILLIMETERS NOMINAL MM
•
LOAD DIRECTION: ANGULAR
•
STANDARD TOLERANCE DESIGNATION: ABEC NO.1
•
BORE DIAMETER: 20.00 MILLIMETERS NOMINAL MM
TECHNICAL CHARACTERISTICS
SURFACE FINISHGROUND
BEARING PRELOAD DESIGNATIONLIGHT
STYLE DESIGNATORUNIVERSAL GROUND FACES, COUNTERBORED OUTER RING, NON-SEPARABLE
OVERALL WIDTH15.0 MILLIMETERS NOMINAL MM
OVERALL OUTSIDE DIAMETER52.00 MILLIMETERS NOMINAL MM
LOAD DIRECTIONANGULAR
STANDARD TOLERANCE DESIGNATIONABEC NO.1
BORE DIAMETER20.00 MILLIMETERS NOMINAL MM
MATERIALSTEEL OUTER RING
MATERIALSTEEL INNER RING
SUBSTITUTES & CROSS-REFERENCES 4
7304BGMReference document
Same NSN cross-reference
Reference document — Secondary reference
7304DTReference document
Same NSN cross-reference
Reference document — Secondary reference
7304BEM/DGAReference document
Same NSN cross-reference
Reference document — Secondary reference
7304D1-2PAIRBRZRETReference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 7304BEGAMVU099?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7304BEGAMVU099?
7304BEGAMVU099 is a BEARING,BALL,DUPLEX.
What parts can replace 7304BEGAMVU099?
There are 4 known substitutes for 7304BEGAMVU099: 7304BGM, 7304DT, 7304BEM/DGA and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 7304BEGAMVU099?
7304BEGAMVU099 is cataloged in the U.S. Government catalog under NSN 3110-00-101-4641. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7304BEGAMVU099

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.