PartsTable
Technical Data Sheet
Download PDF

730404 — RESISTOR,VARIABLE,WIRE WOUND,PRE

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

730404: RESISTOR,VARIABLE,WIRE WOUND,PRE.

RESISTOR,VARIABLE,WIRE WOUND,PRE. Key specifications include body_style: CYLINDRICAL SERVO MOUNTED, body_length: 0.934 INCHES MAXIMUM IN, shaft_style: ROUND, bearing_type: BALL SHAFT, pilot_length: 0.0620 INCHES NOMINAL IN, shaft_length: 1.000 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5905-00-071-9901, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 730404
NSN: 5905-00-071-9901
NIINs: 000719901, 013294659, 016565259
FSC: 5905 — Resistor
CAGE: 02297 — ACE ELECTRONICS ASSOCIATES INC (USA)
SPECIFICATIONS
body_styleCYLINDRICAL SERVO MOUNTED
body_length0.934 INCHES MAXIMUM IN
shaft_styleROUND
bearing_typeBALL SHAFT
pilot_length0.0620 INCHES NOMINAL IN
shaft_length1.000 INCHES NOMINAL IN
shaft_runout0.001 INCHES IN
actuator_typeSINGLE SHAFT
body_diameter2.000 INCHES NOMINAL IN
overall_length0.934 INCHES NOMINAL IN
pilot_diameter0.8750 INCHES MAXIMUM IN
shaft_diameter0.250 INCHES MAXIMUM IN
NSN5905-00-071-9901
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available RESISTOR,VARIABLE,WIRE WOUND,PRE TITLE COMPONENT PN 730404 MFR RESISTOR,VARIABLE,WIRE
KEY FEATURES
•
MAXIMUM RUNNING TORQUE: 0.60 INCH-OUNCES IN
•
BODY DIAMETER: 2.000 INCHES NOMINAL IN
•
ELECTRICAL RESISTANCE PER SECTION: 100.0 KILOHMS SINGLE SECTION
•
MOUNTING LIP DEPTH: 0.0930 INCHES NOMINAL IN
•
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER: 150.0 SINGLE SECTION
•
UNDERCUT WIDTH: 0.1730 INCHES MINIMUM IN
•
SECTION QUANTITY: 1
•
SHAFT DIAMETER: 0.250 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
MAXIMUM RUNNING TORQUE0.60 INCH-OUNCES IN
BODY DIAMETER2.000 INCHES NOMINAL IN
ELECTRICAL RESISTANCE PER SECTION100.0 KILOHMS SINGLE SECTION
MOUNTING LIP DEPTH0.0930 INCHES NOMINAL IN
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER150.0 SINGLE SECTION
UNDERCUT WIDTH0.1730 INCHES MINIMUM IN
SECTION QUANTITY1
SHAFT DIAMETER0.250 INCHES MAXIMUM IN
UNDERCUT DIAMETER0.870 INCHES NOMINAL IN
FUNCTION CHARACTERISTIC PER SECTIONSINGLE SECTION LINEAR
SUBSTITUTES & CROSS-REFERENCES 1
754-6264Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 730404?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 730404?
730404 is a RESISTOR,VARIABLE,WIRE WOUND,PRE. It is classified as a MRO (MRO_GENERAL).
What parts can replace 730404?
There is 1 known substitute for 730404: 754-6264. Substitute compatibility should be verified for your specific system.
What is the NSN for 730404?
730404 is cataloged in the U.S. Government catalog under NSN 5905-00-071-9901. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 730404

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.