PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 730146
730146 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include material: STEEL BAND, overall_width: 0.500 INCHES NOMINAL IN, style_designator: TWO PIECE, material_diameter: 0.250 INCHES NOMINAL IN, loop_inside_diameter: 1.875 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-761-8959, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
730146
NSN: 5340-00-761-8959
FSC: 5340
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
materialSTEEL BAND
overall_width0.500 INCHES NOMINAL IN
style_designatorTWO PIECE
material_diameter0.250 INCHES NOMINAL IN
loop_inside_diameter1.875 INCHES NOMINAL IN
NSN5340-00-761-8959
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 730146 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL DIAMETER: 0.250 INCHES NOMINAL IN
•
STYLE DESIGNATOR: TWO PIECE
•
MATERIAL: STEEL BAND
•
LOOP INSIDE DIAMETER: 1.875 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIAL DIAMETER0.250 INCHES NOMINAL IN
OVERALL WIDTH0.500 INCHES NOMINAL IN
STYLE DESIGNATORTWO PIECE
MATERIALSTEEL BAND
LOOP INSIDE DIAMETER1.875 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
51306-2Interchangeable
interchangeable cross-reference
interchangeable
2HB118Interchangeable
interchangeable cross-reference
interchangeable
D9484-5528Interchangeable
interchangeable cross-reference
interchangeable
X187Interchangeable
interchangeable cross-reference
interchangeable
S24257CInterchangeable
interchangeable cross-reference
interchangeable
013-1223-000Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 730146?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 730146?
730146 is a CLAMP,LOOP.
What parts can replace 730146?
There are 9 known substitutes for 730146: 51306-2, 2HB118, D9484-5528 and 6 more. Substitute compatibility should be verified for your specific system.
Is 730146 still available?
730146 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 730146

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026