PartsTable
Technical Data Sheet
Download PDF

73-1483 — BELL CRANK

✓ Government record, cited
— · COMPONENT
PRODUCT OVERVIEW

73-1483: BELL CRANK.

The BELL CRANK is a the manufacturer industrial component. Key specifications include bore_length: 0.250 INCHES NOMINAL IN, bore_diameter: 0.500 INCHES MINIMUM AND 0.502 INCHES MAXIMUM IN, style_designator: FLAT, ONE ARM OFFSET, end_hole/ball_diameter: 0.328 INCHES NOMINAL SECOND END IN, center_to_center_distance_between_fulcrum_and_arm_end_hole/slot/ball: 3.000 INCHES NOMINAL SECOND END IN. This part is cataloged in the U.S.

Government catalog under NSN 3040-00-732-8332, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
73-1483
NSN: 3040-00-732-8332
NIINs: 007328332, 014648326
FSC: 3040 — Miscellaneous Power Transmission Equipment
CAGE: 03677 — ANTHONY YORK CO (USA)
SPECIFICATIONS
bore_length0.250 INCHES NOMINAL IN
bore_diameter0.500 INCHES MINIMUM AND 0.502 INCHES MAXIMUM IN
style_designatorFLAT, ONE ARM OFFSET
end_hole/ball_diameter0.328 INCHES NOMINAL SECOND END IN
center_to_center_distance_between_fulcrum_and_arm_end_hole/slot/ball3.000 INCHES NOMINAL SECOND END IN
NSN3040-00-732-8332
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available BELL CRANK TITLE COMPONENT PN 73-1483 MFR BELL CRANK
KEY FEATURES
•
CENTER TO CENTER DISTANCE BETWEEN FULCRUM AND ARM END HOLE/SLOT/BALL: 2.000 INCHES NOMINAL FIRST END IN
•
END HOLE/BALL DIAMETER: 0.328 INCHES NOMINAL SECOND END IN
•
BORE LENGTH: 0.250 INCHES NOMINAL IN
•
STYLE DESIGNATOR: FLAT, ONE ARM OFFSET
•
BORE DIAMETER: 0.500 INCHES MINIMUM AND 0.502 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
CENTER TO CENTER DISTANCE BETWEEN FULCRUM AND ARM END HOLE/SLOT/BALL2.000 INCHES NOMINAL FIRST END IN
CENTER TO CENTER DISTANCE BETWEEN FULCRUM AND ARM END HOLE/SLOT/BALL3.000 INCHES NOMINAL SECOND END IN
END HOLE/BALL DIAMETER0.328 INCHES NOMINAL SECOND END IN
END HOLE/BALL DIAMETER0.328 INCHES NOMINAL FIRST END IN
BORE LENGTH0.250 INCHES NOMINAL IN
STYLE DESIGNATORFLAT, ONE ARM OFFSET
BORE DIAMETER0.500 INCHES MINIMUM AND 0.502 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 1
MT46RReference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 73-1483?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 73-1483?
73-1483 is a BELL CRANK.
What parts can replace 73-1483?
There is 1 known substitute for 73-1483: MT46R. Substitute compatibility should be verified for your specific system.
What is the NSN for 73-1483?
73-1483 is cataloged in the U.S. Government catalog under NSN 3040-00-732-8332. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 73-1483

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.