PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 72DH133
72DH133 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC SEAL, bore_shape: STRAIGHT, bore_diameter: 9.00 MILLIMETERS NOMINAL MM, overall_width: 0.5620 INCHES NOMINAL IN, load_direction: RADIAL, surface_finish: GROUND. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-156-4107, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
72DH133
NSN: 3110-00-156-4107
FSC: 3110
CAGE: 93230 — ATF-DAVIDSON CO (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC SEAL
bore_shapeSTRAIGHT
bore_diameter9.00 MILLIMETERS NOMINAL MM
overall_width0.5620 INCHES NOMINAL IN
seal_quantity2
load_directionRADIAL
surface_finishGROUND
style_designatorNON-LOADING GROOVE, NON-SEPARABLE
bearing_seal_typeCONTACT
lubrication_materialGREASE
overall_outside_diameter26.00 MILLIMETERS NOMINAL MM
internal_fit-up_designationSTANDARD
NSN3110-00-156-4107
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 72DH133 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LUBRICATION MATERIAL: GREASE
•
BEARING SEAL TYPE: CONTACT
•
BORE DIAMETER: 9.00 MILLIMETERS NOMINAL MM
•
STANDARD TOLERANCE DESIGNATION: ABEC NO.1
•
STYLE DESIGNATOR: NON-LOADING GROOVE, NON-SEPARABLE
•
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: DOD-G-24508 MIL SPEC SINGLE MATERIAL RESPONSE
TECHNICAL CHARACTERISTICS (FLIS)
LUBRICATION MATERIALGREASE
BEARING SEAL TYPECONTACT
BORE DIAMETER9.00 MILLIMETERS NOMINAL MM
STANDARD TOLERANCE DESIGNATIONABEC NO.1
STYLE DESIGNATORNON-LOADING GROOVE, NON-SEPARABLE
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATIONDOD-G-24508 MIL SPEC SINGLE MATERIAL RESPONSE
LUBRICATION MATERIALGREASE
BEARING SEAL TYPECONTACT
BORE SHAPESTRAIGHT
SEAL QUANTITY2
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
077099Interchangeable
interchangeable cross-reference
interchangeable
77099Interchangeable
interchangeable cross-reference
interchangeable
8450131B4003Interchangeable
interchangeable cross-reference
interchangeable
77090Interchangeable
interchangeable cross-reference
interchangeable
77091Interchangeable
interchangeable cross-reference
interchangeable
77104Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 72DH133?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 72DH133?
72DH133 is a BEARING,BALL,ANNULAR.
What parts can replace 72DH133?
There are 8 known substitutes for 72DH133: 077099, 77099, 8450131B4003 and 5 more. Substitute compatibility should be verified for your specific system.
Is 72DH133 still available?
72DH133 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 72DH133

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026