PartsTable
Technical Data Sheet
Download PDF

728037-1 — CLEVIS,ROD END

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

728037-1: CLEVIS,ROD END.

The CLEVIS,ROD END is a the manufacturer industrial component. Key specifications include material: STEEL COMP 615 OVERALL, fork_depth: 0.119 INCHES NOMINAL IN, shank_length: 0.917 INCHES MINIMUM AND 0.923 INCHES MAXIMUM IN, overall_width: 0.245 INCHES MINIMUM AND 0.247 INCHES MAXIMUM IN, overall_height: 0.150 INCHES NOMINAL IN, shank_diameter: 0.117 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-211-2855, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
728037-1
NSN: 5340-01-211-2855
FSC: 5340 — Hardware, Commercial
CAGE: 73030 — HAMILTON SUNDSTRAND CORPORATION DBA COLLINS AEROSPACE (USA)
SPECIFICATIONS
materialSTEEL COMP 615 OVERALL
fork_depth0.119 INCHES NOMINAL IN
shank_length0.917 INCHES MINIMUM AND 0.923 INCHES MAXIMUM IN
overall_width0.245 INCHES MINIMUM AND 0.247 INCHES MAXIMUM IN
overall_height0.150 INCHES NOMINAL IN
shank_diameter0.117 INCHES NOMINAL IN
fork_span_width0.145 INCHES MINIMUM AND 0.149 INCHES MAXIMUM IN
style_designatorCLEVIS
fork_arm_thickness0.049 INCHES NOMINAL IN
metallic_hardness_rating31.0 NOMINAL ROCKWELL C
securing_pin_hole_diameter0.064 INCHES NOMINAL IN
material_document_and_classificationAMS 5616 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NSN5340-01-211-2855
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 728037-1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SHANK DIAMETER: 0.117 INCHES NOMINAL IN
•
FORK SPAN WIDTH: 0.145 INCHES MINIMUM AND 0.149 INCHES MAXIMUM IN
•
SECURING PIN HOLE DIAMETER: 0.064 INCHES NOMINAL IN
•
FORK ARM THICKNESS: 0.049 INCHES NOMINAL IN
•
DISTANCE FROM PIVOT PINHOLE CENTER TO FORK END: 0.073 INCHES NOMINAL IN
•
SHANK LENGTH: 0.917 INCHES MINIMUM AND 0.923 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: CLEVIS
TECHNICAL CHARACTERISTICS
SHANK DIAMETER0.117 INCHES NOMINAL IN
OVERALL HEIGHT0.150 INCHES NOMINAL IN
FORK SPAN WIDTH0.145 INCHES MINIMUM AND 0.149 INCHES MAXIMUM IN
SECURING PIN HOLE DIAMETER0.064 INCHES NOMINAL IN
FORK ARM THICKNESS0.049 INCHES NOMINAL IN
DISTANCE FROM PIVOT PINHOLE CENTER TO FORK END0.073 INCHES NOMINAL IN
SHANK LENGTH0.917 INCHES MINIMUM AND 0.923 INCHES MAXIMUM IN
STYLE DESIGNATORCLEVIS
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 5616 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
OVERALL WIDTH0.245 INCHES MINIMUM AND 0.247 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 728037-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 728037-1?
728037-1 is a CLEVIS,ROD END.
What is the NSN for 728037-1?
728037-1 is cataloged in the U.S. Government catalog under NSN 5340-01-211-2855. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 728037-1

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.